User manual

Step 2 Press the “ENT” button and the screen will show the message “RAID-0 MODE YES NO”.

Press the “ENT” button again to conﬁ rm.

Step 3 System will show the warning “DATA WILL LOSE YES NO”. To conﬁ rm loss of data is allowed,

press the “ENT button”.

Step 4 System will show the message “RESET SYSTEM YES NO”. Press the “ENT” button to conﬁ rm.

Step 5 After conﬁ rming you will hear a “Beep” sound conﬁ rming that the system has been changed to

the RAID mode as directed.

※To change from RAID 0 to RAID 1 mode, at Step 1 go to the “RAID-1 MODE YES NO” option before

pressing the “ENT” button instead. Follow the remaining steps to change the RAID mode.

3.2.2 Schedule Backup Settings

When the user uses RAID 1 mode for backups, since both hard disks are being mirrored online at the

same time, the backup data may contain viruses. To avoid this problem, the Schedule Backup function

provided by the SR3610 allows the user to deﬁ ne a backup interval of multiple days. At the scheduled

intervals the RAID will back up the data from the Primary Disk to the Secondary Disk. This means the

data in the disk array system does not have to be mirrored constantly at all times. This approach also

saves system processing time, making data backup more efﬁ cient and effective.

Instructions:

The user can specify a certain number of days (1~30 days) and at the appropriate times the system will

automatically back up the data.

Step 1 Log into the system then use “▼” or “▲” with the LCD display to scroll through the options until

“SCHEDULE BACKUP YES NO” appears. (Default system password: 0000)

Instructions 13