Instructions / Assembly
4
© All rights reserved.
FOR YOUR PROTECTION, ALWAYS DISCONNECT PUMP FROM ITS POWER SOURCE BEFORE HANDLING
DO NOT UNDER ANY CIRCUM-
STANCES REMOVE THE GROUND PIN.must If
“Risk of electrical shock”
ELECTRICAL PRECAUTIONS-
allow 2½ hours after disconnecting
before attempting service.
If the above checklist does not uncover the problem, consult the factory - Do not attempt to service or otherwise disassemble pump. Service must
be performed by an Authorized Service Station.
CONDITION COMMON CAUSES
A. Pump will not start or run.
B. Motor overheats and trips overload
or blows fuse.
C. Pump starts and stops too often.
D. Pump will not shut off.
E. Pump operates but delivers little or
no water.
F. Drop in head and/or capacity after
a period of use.








