Use and Care Manual
5
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
IMPORTANT
During the rst few minutes of initial use, you may notice smoke and/or a slight odor.
This is normal and should quickly disappear. It will not recur after appliance has been
used a few more times.
USING YOUR WAFFLE MAKER
Solid surface countertops can be easily scratched, cracked, scorched, or damaged,
especially when exposed to heat. To prevent damage, the following precautions should
be observed when using this product:
• Always use a trivet under heat generating sources such as Wafe Makers, etc.
• Do not place hot pans, pots, ceramic or stoneware inserts, etc. directly on the
countertop surface.
Before rst use, unpack the wafe maker, open the cover and wipe the top and bottom
cooking plates with a damp cloth and then towel dry.
HOW TO USE THIS WAFFLE MAKER
For Customer Assistance, please contact Select Brands Customer Service at 1-913-
663-4500.
1. Insert plug rmly into wall outlet. The POWER light will turn on.
2. Lightly glaze both cooking plates with a small amount of vegetable oil or a non-stick
spray.
3. Close the top to allow the wafe maker to heat up. Preheat Wafe Maker for
approximately 3-5 minutes.
4. Slowly pour wafe mix into the bottom cooking plate. DO NOT overll with wafe mix
or batter. CAUTION: Cooking surface is hot: handle with care.
5. Close lid. Normal cooking time will be 3-6 minutes. The POWER light will turn on
and off as the thermostat keeps the wafe maker at the proper cooking temperature.
6. Remove the wafes from the cooking plates with a plastic (non-metallic) utensil. BE
CAREFUL with the wafes; they are HOT. Allow to cool for a few minutes before
enjoying.
7. Unplug the power supply cord after cooking and allow the wafe maker to cool
before moving or storing.