User's Manual

TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Operating Instructions 46
Motor Calibration
The Motor Calibration function allows for calibration of the TreadClimber
®
speed function. CAUTION: Changing Max
Speed setting may expose users to an increase in risk of injury. Any changes to the TreadClimber maximum speed
settings should be clearly communicated to all users of the TreadClimber. To enter the Motor Calibration function:
1. While in the Maintenance Mode, press the key, to navigate the Motor Calibration by
the next or the previous parameter buttons.
2. While in the Motor Calibration, press the key to begin the calibration. The information
window will display “PWM= XXXXXX SPEED=XX.X” where the X’s are data that the test
will generate.
When the test is finished the information window will display one of the 2 messages “Passed Calibration” or “Failed
Calibration”. If “Failed Calibration” is displayed run test again, if it continues, call for maintenance.
3. Press the STOP key to exit the Motor Calibration function.