User's Manual

TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Operating Instructions
45
Item
Lowest
Value
Default
Value
Highest
Value
Meaning
Mc1 V X.XX
N/A
N/A N/A Display’s primary processor software version and checksum.
LOCKOUT ID 10000 12345 65535 TreadClimber
®
lockout ID.
MINIMUM 0.5/0.8 0.5/0.8 2.0/3.2 Minimum speed in mph (UNITS=English), or km/hr (UNITS=Metric).
SPEED
MAXIMUM 5.0/5.0 10.0/16.0 12.5/20.0 Maximum speed in mph (UNITS=English), or km/hr (UNITS=Metric).
SPEED Caution: See Motor Calabration before making any changes.
ACCELERATI- 3 12 30 Time, in seconds, to reach maxmium speed from 0 mph (0 km/hr).
ON TIME
DECELERATI- 3 11 30 Time, in seconds, to reach 0 mph (0 km/hr) from maximum speed.
ON TIME
DATE 1.00 1.98 12.99 TreadClimber manufacture date.
STOP - - - Either E-Stop or Lanyard.
LAST DECK 0 0 65,535 Number of miles (UNITS=English), or km (UNITS=Metric) since the
running deck was last serviced or replaced.
LAST BELT 0 0 65,535 Number of miles (UNITS=English) or km (UNITS=Metric) since the
running belt was last replaced.
PROGRAM - - - Provides access to programs usages and counters. (See Sub Menu)
STATS
LED TEST - - - LED Testing function, Press OK to begin
KEYPAD - - - LED Testing function, Press OK to begin
HEART RATE - - - HEART RATE Test function.
TEST
SERIAL - - - RS 232 Ports test (Manufacture Test Only).
TEST
ERROR - - - Provides Access to Error List.
LAST ERROR - - - Last Error List Menu, Press OK to View
LIST
CALIBRATION - - - Provides Access to View Calibration Data.
VALUES
MOTOR - - - Motor Calibration Function, Press OK to begin.
CALIBRATION
TREADLE - - - Display current value of treadle sensor
SENSOR
BURN IN - - - Burn In Mode Function (Manufacture Only).
MODE
CCB V X.XX
USB V X.XX
When the MINIMUM SPEED or MAXIMUM SPEED parameters are changed, the unit will perform an auto calibration. To
terminate the auto calibration and return the parameter to its default setting, press the STOP key.