User's Manual

TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Operating Instructions
35
HOT BAR
®
CONTROL FEATURES
The Hot Bar is designed to provide
quick access buttons for speed and,
incline adjustment and engaging the
stop button will stop all movement.
Push “+” down on the dual-action
button or away to increase the speed
of incline level. Push “-“ down or pull
to decrease.
Stop Button: Push on the red
Dual Purpose Stop Button to stop
the unit or to reset after the
emergency lanyard has been
pulled.
Pull Cord Stop
Pull Cord Stop: Clip on the Pull Cord Stop to your shirt for proper application. A tug on the cord will trip the emergency
stop switch and the TreadClimber
®
will stop operating. Press on the red Dual Purpose Stop Button to reset
theTreadClimber.
SAFTEY FIRST
Your TreadClimber is equipped with an easy to reach HOT BAR® that provides you with an additional PAUSE/STOP
button and a Stop Switch.
The Stop Lanyard Clip attached to the HOT BAR® is provided for your protection to stop the machine. Always attach
the Stop Lanyard Clip to your clothing before each workout. Attach it to your clothes near the waistline. If the cord
is pulled the Stop Switch will be activated and the treadmill will stop operating. If the Stop Switch has been activated,
press the smaller yellow RESET button to reset the TreadClimber and resume normal operation.
During use, press the red STOP button to PAUSE your workout. Press the STOP button a second time while in Pause
mode to stop and cancel the workout program.
Important: Facility owners, managers, personal trainers and personnel. Remind users of the importance of always
attaching the Stop Lanyard Clip before operating the unit. It is the facility’s responsibility to train and instruct in the proper
use of the TreadClimer by Star Trac including use of all of the safety features.
Note: A clipping feature is provided in the display housing to store the Stop Lanyard Clip when the unit is not in use.
SAVE THESE INSTRUCTIONS
Stop Lanyard Clip