User's Manual

TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Assembly Instructions
31
28. Transport/push (Fig. 30) the TreadClimber to its final
location by rolling it into position.
Fig. 30
29. Dislodge the rear step plugs (Fig. 31) to expose the
wheel jacking bolts. Turn the bolts in a counter clock
direction to retract the rear wheels into the base and
rest the machine on the rear stabilizing feet.
Fig. 31
30. Wedge the cover plugs back into the rear step shroud
once the TreadClimber is resting on the stabilizing feet.
31. Plug the power cord into the power & connections
panel located at the front of the machine (Fig. 32).
Fig. 32
32. Power on the machine and enter into “Maintenance Mode” to process a “Motor Calibration” procedure.
Once “Motor Calibration” is complete; the TreadClimber is ready for initial use.