User's Manual

TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Assembly Instructions

22. Mount the rear shroud to the TreadClimber base and

secure it in place by installing the corresponding five

Phillips head screws to the top (Fig. 23) and lower

(Fig. 24) sections at the circled locations.

Fig. 24

Fig. 23

23. Mount the left & right corner shrouds (Fig. 25) and

secure them in place by installing the corresponding

four Phillips head screws to each shroud at the circled

locations.

Fig. 25

24. Mount the rear step shroud (Fig. 26) and wedge the left

& right handrail grommets into the available open

space between the shrouds. Secure the rear step

shroud by installing the corresponding five Phillips

head screws at the circled locations.

Fig. 26.