User's Manual

TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Assembly Instructions 28
19. Secure the display to the console frame by installing
six Phillips head screws with washers (Fig. 18) at the
corresponding circled locations (Fig. 20).
Fig. 20
20. Mate the back shroud of the display with the rest of the
assembly by installing eight Phillips head screws at the
corresponding circled locations (Fig. 21).
Fig. 21
21. Dislodge the rear step shroud from the TreadClimber
base (Fig. 22) and move the handrail grommets up the
handrails.
Fig. 22