Fitness Electronics User's Manual

STAR TRAC UNIVERSAL TV BRACKET INSTALLATION

STEP4

Remove the cap cover with the Star Trac logo from the

plastics by removing the (2) screws using a #2 Phillips

screwdriver. Retain the screws for later use. You will no

longer need the cap cover and, if desired, you can store it

away for any possible future use.

STEP5

Remove the (2) M8 button head screws retaining the cross

brace using the 5mm Hex Key. Found in the hardware kit.

Retain the screws for later use. You will no longer need

the cross brace and, if desired, you can store it away for

any possible future use.

STEP6

Take the TV neck bracket from the package. Install the

(4) M8 Button head Screws through the TV neck bracket

into the display mount. Note: (2) of the screws are in the

PVS kit, (2) retained from earlier step. Do not tighten

them at this time.