Star Trac Pro STM Treadmill Star Trac ProTM Treadmill Star Trac Pro EliteTM Treadmill OWNER’S MANUAL
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 1: Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vieligheidsinstructies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION Welcome to the world of STAR TRAC. This Owner’s Manual will acquaint you with the assembly, operation and maintenance of your STAR TRAC PRO S / PRO / PRO ELITE TREADMILL, so that you may begin reaching your fitness goals. The PRO S / PRO / PRO ELITE Treadmills provide the most comprehensive integration of user needs with the Club’s needs in the Club’s most used cardio vascular product, the Treadmill. Users will appreciate the multifunctional display of the Pro series for its style and utility.
SAFETY INSTRUCTIONS CHAPTER 1 This chapter includes fitness safeguards and precautions for the installation and use of the Pro / Pro S Treadmill. These safety notes are directed to you as the owner of the Star Trac Pro / Pro S Treadmill. Please read this chapter carefully before installing or using your equipment and be sure to train all your members and fitness staff to follow these safety instructions.
VEILIGHEIDSINSTRUCTIES WAARSCHUWING Dit prodkt is voor gebruik op een circuit met een nominale waarde van 120 volt en is in de fabriek uitgerust met een speciaal elektrisch snoer en stekker om verbinding met een passend elektrisch circuit toe te staan. Zorg ervoor dat dit produkt verbonden is met een stopcontact dat dezelfde configuratie heeft als de stekker. GEBRUIK GEEN ADAPTER BIJ DIT PRODUKT.
PRECAUTIONS CAUTION: READ THE OWNER’S MANUAL COMPLETELY BEFORE OPERATING THIS TREADMILL STOP (OF ACTION) CAUTION: BEFORE CLEANING OR SERVICING, DISCONNECT POWER SUPPLY ALTERNATING CURRENT ON CAUTION: MOVING PARTS, KEEP HANDS AND FEET FROM UNDER THE TREADMILL WHEN OPERATING I ON O OFF OFF These safety notes are directed to you as the owner of the STAR TRAC PRO S / PRO / PRO ELITE TREADMILL. For safety purposes, please train all your members and fitness staff to follow these safety instructions.
MESURES DE PRECAUTION ATTENTION: .LISEZ SOIGNEUSEMENT LE MANUEL D’UTILISATION AVANT D’UTILISER CE TAPIS ROULANT ATTENTION: DÉBRANCHEZ A LA SOURCE AVANT D’EFFCTUER UN ENTRETIEN DU UNE RÉPARATION ATTENTION: NE PAS GLÍSSER LAS MAÍNS DU LES PIADS SOUS LE TAPIS ROULANT EN ACTION ARRÊT (MISE HORS SERVICE) COURANT ALTERNATIF ON I OUVRE O FERME OFF Ces instructions sont destinées su propriétaire du TAPIS STAR TRAC PRO S / PRO / PRO ELITE.
SICHERHEITSVORSCHRIFTEN WARNUNG Dieses Produkt ist für den Gebrauch an einer passenden Netzsteckdose mit 220 Volt Spannung bestimmt und werkseitig mit einer dafür vorgesehenen Netzleitung und einem Netzstecker ausgerüstet. Stellen Sie sicher, daß das Gerät nur an einem Anschluß mit gleicher Bauart wie der Stecker angeschlossen wird. VERWENDEN SIE DEINEN ADAPTER FÜR DEN BETRIEB DES PRO / PRO S.
ISTRUZIONI DI SICUREZZA ATTENZIONE Questo prodotto è da usare su un circuito elettrico con una tensione nominale di 220 volt ed è fornito dalla fabbrica con un cavo elettrico e spina specifici per permettere il collegamento ad un circuito elettrico appropriato. Assicuratevi che il prodotto sia collegato ad una presa che abbia la stessa configurazione della spina. NESSUN ADATTATORE DEVE ESSERE USATO CON QUESTO PRODOTTO.
INSTRUÇÕES DE SEGURANÇA ADVERTÊNCIA Este produto deve ser usado em um circuito com tensão nominal de 220 volts. Ele foi fabricado com um cabo de alimentação e plugue específicos para permitir a sua conexão com um circuito elétrico apropriado. Certifique-se de que o produto esteja conectado a uma tomada com as mesmas configurações do plugue. NÃO UTILIZE ADAPTADORES PARA ESTE PRODUTO.
INSTRUCCIONES DE SEGURIDAD ADVERTENCIA Este producto está preparado para utilizarse en un circuito de 220 voltios y se suministra equipado de fábrica con un cable y un enchufe eléctricos específicos para permitir su conexión a un circuito eléctrico apropiado. Asegúrese de que el producto se conecte a una toma de corriente con la misma configuración que el enchufe. NO UTILICE NINGÚN ADAPTADOR CON ESTE PRODUCTO.
SIKKERHEDSINSTRUKTIONER ADVARSEL Dette produkt er beregnet til brug i forbindelse med et el-net med nominel effekt på 220 volt. Det leveres med særlig ledning og stik fra fabrikken, som kun passer til den korrekte type el-net. Sørg for, at produktet er sat til en stikkontakt, som har samme konfiguration som stikket. DER MÅ IKKE BRUGES ADAPTER TIL DETTE PRODUKT. Hvis produktet absolut skal omstilles til en anden slags el-net, skal omstillingen foretages af kvalificeret servicepersonale.
ASSEMBLY AND CHAPTER SETUP 2 UNPACKING Remove all parts from the shipping crate and verify that the following parts were included in your shipment: Description Qty. Frame Assembly w/ Motor Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Top Rail with Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Neck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Installing the Neck Remove the four pre-installed neck mounting screws and washers from the motor shroud end of the frame assembly. Position the neck in place on the motor shroud end of the frame assembly, and re-install the four screws and washers to secure. NECK MOUNTING SCREWS AND WASHERS Step 2a Step 2b 3. Removing the Motor Shroud Remove the 10-24 screws securing the motor shroud to the frame assembly, and lift the motor shroud off of the frame assembly.
Step 4a Position the display on the neck, taking care not to pinch the cables between the neck and the display. Once the display is properly positioned, install the two 5/16”-18 bolts to secure the display to the neck. Step 4b Step 4c Once the display has been secured in place, route the display cables through the cutout in the neck, and into the motor compartment.
5. Installing the Handrails Locate the left handrail (the handrail with the STOP switch). Connect the STOP switch cable from the handrail to the display cable extending from the display handrail stub. Step 5a Insert the handrail connecting tube into the display handrail stub, taking care not to pinch the STOP switch cable between the handrail pieces. Make sure the handrail bottoms fully against the display handrail stub.
Position the bottom of each handrail over its associated mounting hole in the frame assembly. Insert one 5/16” x 7.5” screw, with a flat washer installed, through the bottom of the frame assembly, and thread into each handrail. Use 9 1/2” wrench to tighten the screws. Step 5e 6. Connecting the Display Cables For units with fans (PRO / PRO ELITE), connect the cables tagged 715-3444 and 715-3419 from the display to connectors J3A and P4A, respectively, on the 715-3441 PCB in the motor compartment.
For units with scale system (PRO ELITE), connect the cables tagged 715-3418 RIGHT and 715-3418 LEFT from the display to connectors P1 and P2, respectively, on the load cell interface. Step 6c 7. Final Assembly Re-install the shroud over the motor compartment, and secure in place with the previously removed screws. Insert the four plastic buttons into the screw access holes at the bottom of the neck assembly. Step 7a Step 7b Securely tighten all hardware installed during assembly.
CHAPTER OPERATING INSTRUCTIONS - PRO / ELITE 3 Operating the STAR TRAC PRO / PRO ELITE TREADMILL is very easy. Simply step onto the running belt, press QUICK START, and begin walking or running naturally. Learning the features and incorporating the STAR TRAC PRO / PRO ELITE TREADMILL into your members’ fitness programs is just as easy. In this chapter, you will learn the display function and how to get the most out of every STAR TRAC PRO / PRO ELITE TREADMILL workout.
Motivational Track: Shows your progress counter clockwise around 1/4 mile (400-meter) course, starting from the bottom center. Speed Keys: Adjust running belt speed in 0.1 miles per hour (mph) or 0.1 kilometers per hour (km/hr) increments. To increase or decrease speed, press the or keys, respectively, until the desired speed appears in the Information Window, then, press START. Speed cannot be higher than the established MX SPD parameter (see Chapter 8.) These keys repeat when pressed and held.
■ Try different walking or running rhythms. In manual operation, adjust your pace from low speed to high speed, then back to low. As you become more comfortable with your treadmill, try going faster or using the preset programs. ■ Watch the Graphic Display to anticipate terrain changes. When you use the preset programs, the display shows changes in terrain as tall or short columns. The display also notifies you of incline changes with a series of beeps and a flashing display element.
0 9 ■ You can enter your weight using the numeric keypad. Use the ■ You can press the increments. ■ When your correct weight has been entered, press the START or ENTER key to accept the displayed value and advance to the next workout parameter. or keys to enter your correct weight. key, as necessary, to increase or decrease the displayed weight in 1 pound (or 1 kg) 2. You are prompted to enter a time goal. ■ The default time goal is 20 minutes.
■ To jump to another CLIMBING PARTNER program, press the MYSTERY key, as desired. CLIMBING PARTNER key, then press the FOREST , TRAIL , or ALPINE 11. When you have reached your workout goal, the treadmill will enter the Cooldown cycle (see “Cooldown Cycle” for more information). If you wish to exit your program before you have reached your workout goal, press the STOP key twice. The treadmill will slow to a stop. (Press the STOP key once during a Pause to exit the program.
1. Press the ATHLETIC PARTNER key, then press the “Distance Goal”. CUSTOM key. You will be prompted to select a “goal” type, either “Time Goal” or Press the 1 key to select “Time Goal”; press the 2 key to select “Distance Goal”. The Information Window will display a prompt to enter a time goal, or distance goal, as appropriate: Time Goal - The default time goal is 20 minutes. You may enter any time goal from 5 to 99 minutes.
You can adjust treadmill speed from 0.5 to 10.0 mph (0.8 to 16.0 kph) for 110-volt units or 0.5 to 12.0 mph (0.8 to 19.3 kph) for 220-volt units, in 0.1 mph (or 0.1 kph) increments. Press the key to increase the treadmill speed; press the key to decrease the treadmill speed. 13. You can adjust your time goal during the program: ■ You can adjust your time goal from 5 minutes to the maximum allowed program time. Press the ADJUST key to decrease your time goal. increase your time goal; press the ADJUST 14.
WEIGHT MANAGEMENT PROGRAMS The WEIGHT MANAGEMENT programs include the CARDIO TRAINING (Dynamic Heart Rate Control), MANUAL, CUSTOM INTERVAL and FIT TEST programs. When using the CARDIO TRAINING (Dynamic Heart Rate Control) program, use of the heart rate strap (rather than the heart rate grips) is recommended. TRAINING CUSTOM To operate the Custom Interval and Fit Test programs: ■ WEIGHT MANAGEMENT Stand on the running belt.
■ You can enter a new upper heart rate limit using the numeric keypad. Use the 0 9 keys to enter the desired upper heart rate limit. ■ You can use the increments. or key, as necessary, to increase or decrease the displayed upper heart rate limit in 1 BPM ■ When the desired upper heart rate limit has been entered, press the START or ENTER key to accept the displayed value and advance to the next parameter. 6. You are prompted to enter your lower heart rate limit.
■ You can press the ■ or key, as necessary, to increase or decrease your time goal in 1 minute increments. When your desired time goal has been entered, press the START or ENTER key to accept the displayed value. You are prompted with a 3 second countdown, then the treadmill begins the program. 3. You can adjust the incline of the treadmill during the program: ■ You can adjust treadmill incline from 0 to 15%, in 0.5% increments. Press the incline; press the key to decrease the treadmill incline. 4.
6. You can adjust the speed of the treadmill during the program: ■ You can specify a desired speed from 0.5 to 10.0 mph (0.8 to 16.0 kph) for 110-volt units or 0.5 to 12.0 mph (0.8 to 9 keys to enter your desired speed, then press 19.3 kph) for 220-volt units, using the numeric keypad. Use the 0 the START or ENTER key to accept the entered speed. You can adjust treadmill speed from 0.5 to 10.0 mph (0.8 to 16.0 kph) for 110-volt units or 0.5 to 12.0 mph (0.8 to 19.3 kph) for 220-volt units, in 0.
NOTE: The weight scale can be used while the treadmill is idle, or during program setup. The weight scale cannot be used while the treadmill is running, or in Pause mode. To use the weight scale: ■ Stand on the weight scale within 10 seconds of being prompted during program setup. ■ Wait for the weight scale to acquire your weight (this may take up to 10 seconds). ■ When your weight is acquired, it is displayed in the Information Window.
CHAPTER OPERATING INSTRUCTIONS - PRO S 4 Operating the STAR TRAC PRO S TREADMILL is very easy. Simply step onto the running belt, press QUICK START, and begin walking or running naturally. Learning the features and incorporating the STAR TRAC PRO S TREADMILL into your members’ fitness programs is just as easy. In this chapter, you will learn the display function and how to get the most out of every STAR TRAC PRO S TREADMILL workout.
Speed Keys: Adjust running belt speed in 0.1 miles per hour (mph) or 0.1 kilometers per hour (km/hr) increments. To increase or decrease your speed, press the or keys, respectively, until the desired speed appears in the Information Window, then, press START. The speed cannot be higher than the established MX SPD parameter (see Chapter 8.) These keys repeat when pressed and held. Speed Window: Shows the speed at which the user is walking/running, from 0.5 mph (0.8 kph) to 10.0 mph (16.
To operate the Quick Start program: 1. Stand on the running belt and press the QUICK START key. The running belt slowly accelerates to its minimum speed of 0.5 mph (0.8 kph). 2. You can adjust the incline of the treadmill during the program: ■ You can adjust treadmill incline from 0 to 15%, in 0.5% increments. Press the incline; press the key to decrease the treadmill incline. 3.
0 9 ■ You can enter the maximum speed using the numeric keypad. Use the ■ You may enter any speed from 0.5 to 10.0 mph (0.8 to 16.0 kph) for 110-volt units or 0.5 to 12.0 mph (0.8 to 19.3 kph) for 220-volt units. ■ You can press the or key, as necessary, to increase or decrease the maximum speed in 0.1 unit increments. When the desired maximum speed has been entered, press the START or ENTER key to accept the displayed value and advance to the next workout parameter.
■ You can press the increments. or key, as necessary, to increase or decrease the displayed weight in 1 pound (or 1 kg) ■ When your correct weight has been entered, press the START or ENTER key to accept the displayed value. You are prompted with a 3 second countdown, then the treadmill begins the program. 2. You can adjust the incline of the treadmill during the program: ■ You can adjust treadmill incline from 0 to 15%, in 0.5% increments.
■ You can press the increments. or key, as necessary, to increase or decrease the displayed weight in 1 pound (or 1 kg) ■ When your correct weight has been entered, press the START or ENTER key to accept the displayed value and advance to the next workout parameter. 4. You are prompted to enter your age. ■ You may enter any age from 1 to 99 years. ■ You can enter your age using the numeric keypad.
COOLDOWN CYCLE Once you have completed your workout program, the treadmill enters a 2-minute cooldown cycle. To operate the treadmill during Cooldown: 1. You can adjust the incline of the treadmill during the program: ■ You can adjust treadmill incline from 0 to 15%, in 0.5% increments. Press the incline; press the key to decrease the treadmill incline. 2. You can adjust the speed of the treadmill during the program: key to increase the treadmill ■ You can specify a desired speed from 0.5 to 10.
CHAPTER PERSONAL TRAINER S TUDIOTM 5 PERSONAL TRAINER STUDIOTM The unique Personal Trainer StudioTM was developed by Star Trac in conjunction with focus groups of the personal training industry.
5. Press the START or ENTER button to delete the currently displayed PIN number. Press the START or ENTER button a second time to confirm the deletion. 6. If desired, repeat steps 4 and 5 to delete additional PIN numbers. When all desired PIN numbers have been deleted, press the STOP button to exit the “Delete PIN” function. To view active PIN numbers: PERSONAL TRAINER STUDIO 1. Press the 2. Use the 0 3. Press the 9 3 key; you will be prompted to enter a PIN code.
PERSONAL TRAINER STUDIO Personal Trainer Password: PROGRAM WORKSHEET _______________________ PROGRAM 1 PROGRAM 2 PROGRAM 3 PROGRAM 4 PROGRAM 5 TIME GOAL: DIST. GOAL: TIME GOAL: DIST. GOAL: TIME GOAL: DIST. GOAL: TIME GOAL: DIST. GOAL: TIME GOAL: DIST. GOAL: Time / Time / Time / Time / Time / Dist. Speed Incline Dist. Speed Incline Dist. Speed Incline Dist. Speed Incline Dist.
■ The total number of segments equals 20. ■ The combined value of the segment goals is equal to the total goal. To edit a custom program: PERSONAL TRAINER STUDIO 1. Press the 2. Use the 0 3. Press the 9 EDIT PROGRAM key; you will be prompted to enter a PIN code. keys to enter your personal PIN code, then press the START or ENTER key. key to enter the “Edit Program” function. 5 key to select a program for deletion. Press the START or ENTER key to begin editing the select4.
CHAPTER TRAINING INFORMATION 6 To assist you in your training program, this chapter provides you with exercise principles, tips for training and hints to stay motivated climbing up the conditioning ladder. THE FIRST STEP TO A BETTER LIFESTYLE With the STAR TRAC PRO S / PRO / PRO ELITE TREADMILL, you’ve taken an important first step to achieving your fitness goal. But, it’s important to have the right fitness tools to stay motivated and achieve results.
F.I.T. Principle Every cardiovascular program should be developed based on frequency, intensity and duration. Determining your Target Heart Rate Range 1) Frequency - the number of exercise sessions per week. Regular exercise should be performed at least three or four days a week to be beneficial, although fewer sessions may be sufficient for some. Those in superior physical condition typically train five to seven days per week. 2) Intensity - how hard each exercise is.
Program I: Week 1,2 3,4 5,6 Heart Rate (%) 60 to 65 60 to 65 60 to 65 Duration (minutes) 15 15 15 Workouts per Week 3 3 3 Heart Rate (%) 65 to 70 65 to 70 65 to 70 Duration (minutes) 20 20 20 Workouts per Week 3 3 3 Heart Rate (%) 70 to 75 70 to 75 70 to 75 Duration (minutes) 20 25 25 Workouts per Week 4 4 4 Heart Rate (%) 75 to 80 75 to 80 75 to 80 Duration (minutes) 25 25 30 Workouts per Week 4 4 4 Heart Rate (%) 80 to 85 80 to 85 80 to 85 Duration (minutes) 30 35 35 Workouts per Week 4 4 4
Athletic Exercisers Competitive and advance exercisers often look for varied programs for sports enhancement or maintenance. A great sports enhancement program is the Custom Interval. This program allows the user to set all parameters of intensity and duration for up to 20 intervals. The Custom Interval program is ideal for speed training, or anaerobic training. If competition is an interest, the 5K and 10K runs offer the user a route to follow and a means to monitor progress.
PREVENTATIVE MAINTENANCE CHAPTER 7 Star Trac strongly recommends performing regular preventive maintenance on your STAR TRAC PRO S / PRO / PRO ELITE TREADMILL. Without regularly scheduled maintenance, normal wear and tear may cause cumulative effects, such as misalignment or premature wear. This may result in downtime. For this reason, we highly recommend following the maintenance schedules..
ADJUSTMENTS The running belt and its headroller, drive belt, tailroller, and running deck are designed to be self-centering, slip-free, and smoothoperating without the need for frequent adjustments.
B. Hold the edges of the towel; pull to the tailroller; pull to the headroller; then pull the belt down to wipe the remaining belt. TIP: Fold the dirty towel and shake into trash. 3. LIFT BELT: Lift the left side (facing display) of the belt, about 12 inches down from the motor shroud (see figure). Hold the belt up to elevate the belt from the deck. 4. SPREAD WAX: Flip the nozzle on the cap of the wax bottle. Point the nozzle at the deck. Be sure that the bottle is tilted at a downward angle.
ENGINEERING & TEST CHAPTER 8 After having used your STAR TRAC PRO / PRO S TREADMILL for many workouts, you may wish to change some of its settings. MANAGER SETTINGS The Manager Settings allow you to query and modify the basic settings of your treadmill. To enter Manager Settings: 0 1. Press and hold the 1 2. Release the , 1 , and START keys together. key. 3. A beep will sound and “MANAGER SETTINGS” will display momentarily in the Information Window. 4. Release the remaining keys.
Lowest Value Default Value Highest Value SERIAL NO 0 0 65,535 LANGUAGE - English - Language in English, Dutch, French, German, Portuguese, Spanish, Swedish, Italian or Katakana. ENTRY - Units - Speed entry: First character is UNITS, or TENTHS. METS - OFF - ON=METS display enabled. OFF=METS display disabled. WATTS - OFF - ON=WATTS display enabled. OFF=WATTS display disabled. PAUSE 30 45 120 SCALE** - OFF - ON=Treadmill weight scale enabled.
START Start Key: Updates (saves) the value of the displayed parameter in Flash memory. Alternatively, the ENTER key may be used (see below). ENT Enter Key: Updates (saves) the value of the displayed parameter in Flash memory. Alternatively, the START key may be used (see above). 0 9 STOP Number/Program Select Keys: Enter new data item values for numeric parameters. Stop Key: Exits Maintenance Settings Mode and restarts the treadmill greeting.
Lowest Value Default Value Highest Value ENTERTAINMENT - OFF - ON=Entertainment enabled. OFF=Entertainment disabled. RAIL STOP - OFF - ON=Enables hardware stop for European units. OFF=Disables hardware stop for European units. 22.0 30.7 74.0 31 31 125 Item 10 REV CNT/REV Meaning Inches of running belt travel for 10 flywheel revolutions, always measured in inches. Nominal values are: ■ 1.6" pulley: 27.5 ■ 1.7" pulley: 29.1 ■ 1.8" pulley: 30.7 ■ 2.1" pulley: 35.
Lowest Value Default Value Highest Value 10000 12345 65535 LOCK OUT - OFF - ON=Treadmill lock out enabled. OFF=Treadmill lock out disabled. AUTOST - OFF - ON=Automatic reporting of CSAFE state changes enabled. OFF= ON=Automatic reporting of CSAFE state changes disabled. MODEL 0 5 255 QUICK-START 0 0 65,535 Number of time the Quick Start program was run since last reset. MANUAL** 0 0 65,535 Number of times the Manual program was run since last reset.
Press the ENTER key to accept the displayed value. The Information Window will return to the Calibrate Scale menu. Proceed to step 6. 5. To calibrate the weight scale using the calibrated weight set: ■ ■ Press the 2 key. The Information Window will display the message “PLACE CAL WEIGHT ON WEIGHT PADS”, followed by the message “PRESS ENTER TO BEGIN”. ■ Place the calibrated weights (125 lbs. per weight) on the weight scale, then press the ENTER key.
6. When maximum elevation is obtained, press and hold the next to the value in the “ABC” field; “68M” for example. 0 key until an “M” is displayed in the Information Window 7. Press the ALPINE key to accept the displayed value as elevation maximum. The “Z” will be removed from the Information Window display. 8. Press the STOP key to exit the Elevation Calibration function.
2. Press the keys, as necessary, to scroll through the list of saved club names/messages until the desired club name/message is shown in the Information Window. The Information Window will display the message “DELETE CONFIRM” followed by the message “ENTER TO DELETE - PRESS STOP TO CANCEL”. 3. Press the ENTER key to delete the displayed club name/message. The Information Window will display the message “CLUB DELETED” briefly, then return to the Club Naming menu. 4.
2. Press the keys, as necessary, to scroll through the list of CSAFE Company Names until the desired club name/message is shown in the Information Window. The Information Window will display the message “DELETE CONFIRM” followed by the message “ENTER TO DELETE - PRESS STOP TO CANCEL”. 3. Press the ENTER key to delete the displayed CSAFE Company Name. The Information Window will display the message “CSAFE DELETED” briefly, then return to the CSAFE Naming menu. 4.
T ROUBLESHOOTING CHAPTER 9 Star Trac recommends that you refer your questions about your STAR TRAC PRO S / PRO / PRO ELITE TREADMILL operation and suspected malfunctions to Star Trac’s Service Hotline at (800) 503-1221, or USA 1-714-669-1660. However, you may wish to investigate error messages that appear in the Information Window. You may do so by reviewing the information in this section. KEY DN: This error generally occurs when a key is held pressed while the ON/OFF switch is moved to ON.
CHAPTER TITLE FCC AND CHAPTER 10 OTHER DOMESTIC / INTERNATIONAL REGULATIONS The PRO S / PRO / PRO ELITE TREADMILLS have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC rules. Under the FCC guidelines, operation is subject to the following two guidelines: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
STAR TRAC 14410 Myford Road Irvine, California 92606 Telephone: (800) 228-6635, (714) 669-1660 Fax: (714) 508-3303 http://www.startrac.