Micro USB KVM Switch 2 Port Micro USB KVM Kit with Audio and Cables SV211KUSB Instruction Manual Actual product may vary from photo
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Instruction Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Contents . . . . . . . .
Instruction Manual Introduction Thank you for purchasing a StarTech.com 2-port Micro USB KVM Kit. This product allows you to access and control two USB-enabled computers and features an independant audio/mic switching function that offers uninterrupted audio, even while connected to another computer.
Instruction Manual Installation This section details how to install the optional Windows-based software, as well as how to make the necessary physical connections between your peripherals and the KVM switch. For best results, ensure that all the computers to be controlled are located as close as possible to the KVM switch and console peripherals (monitor, keyboard, mouse), as this will reduce the length of cabling required and reduces the chance of interference.
Instruction Manual 2. Using a USB + Video Data Cable, connect one end (blue) to the video out connector on computer 1. (This will be the same connector from which you disconnected the monitor in step 1, if applicable.) Connect the opposite end to the VGA port on the back of the KVM Switch. 3. Plug the USB portion of the USB + Video Data Cable into an available USB port on computer 1. 4. Optional: If you wish to use audio, plug the slim 3-in-1 KVM combo cable into the mic and speaker out ports.
Instruction Manual various hotkey sequences that can be used with the switch: Command Name Hotkey Sequence Description Select active computer [ScrLk]+[ScrLk]+[x] Switches access to the computer connected to the corresponding port number on the KVM. ([x]= a number on the keyboard) Select USB hub control [ScrLk]+[ScrLk]+[Fx] Switches which corresponding port number has access to the to the devices connected to the KVM’s USB hub. ([Fx] = Function key: F1=Port 1, F2=Port 2, etc.
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one-year warranty. In addition, StarTech.
About StarTech.com StarTech.com is “The Professionals’ Source for Hard-to-Find Computer Parts”. Since 1985, we have been providing IT professionals with the quality products they need to complete their solutions. We offer an unmatched selection of computer parts, cables, server management solutions and A/V products and serve a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
