Printer User Manual

– 39 –
3. Printer Mechanism
(1) Remove the power supply connector.
(2) Remove:
• Screws 4 pcs. [1]
• Connector [2]
Cut the wire band in four places.
• Printer Mechanism [3]
Refer to Step 4 to remove the connector which is
connected to the main logic board from the printer
mechanims.
4. Main Logic Board
(1) Remove the power supply connector.
(2) Remove:
• Four screws [1]
• Wiring band
• Connectors
• Screws 4 pcs. [2]
• Main Logic Board [3]
When removing the wiring band, check which one
is the lead wire.
[1]
[2]
[3]
[1]
[2]
[1]
[3]