Hardware manual

- 21 -
5. General Specications
Item Specications
Printing method Direct line thermal printing
Characters per line Maximum 92 cpl
Character size
Alphanumericcharacters:9X24dots,12X24dots,and9X17dots
Japanesecharacters:24X24dots
Character types
Alphanumeric characters, expanded graphic characters, JIS Level-1 Kanji Set, JIS Level-2
Kanji Set, and special characters
Dot density 203dpi(8dots/mm)
Printing width 104mm, 832 dots
Print speed 80mm/s(max)
Bluetooth Spec. BluetoothV2.1+EDR/Class2(10m)
Frequency Range 2.4 GHz ISM BAND
Data Transmission Rate 57600 bps Fixed
Interface Bluetooth Data bit 8 Data bit Fixed
Parity bit No Parity Fixed.
Stop bit 1 Stop bit Fixed.
SSP Incompatible
RS-232C
Roll paper Thermal roll paper (112 mm wide with a diameter of Ф50 mm)
Barcode
1D: JAN, EAN, UPC, ITF, Code39, Code93, Code128, CODABAR(NW-7)
2D: PDF417, QR Code, DATA Matrix
Receive buer size 1M bytes *1)
MSR
SM-T400i : Not Supported MSR
SM-T404i:ISO7810/7811/78121st,2ndand3rdTrackReading
LCD 128×32 Dots FSTN (Blue LED Backlight)
Battery pack Rechargeable7.4VDC
Battery operating time
Approximately 20 hour printing (12 receipts per hour)
Approximately 24 hour prnting
(12receiptsperhour/autopowerdownmode)
Battery charger
Input: 100to250VAC,50to60Hz
Output:8.4VDC/0.8A,Timerequiredforfullcharge:4h
Environmental
Requirements
Temperature *2 )
Thermal
Paper
-10
o
C to 50
o
C (for operation)
-20
o
C to 60
o
C (for storage)
Thermal
Label
0
o
C to 50
o
C (for operation)
-20
o
C to 60
o
C (for storage)
Humidity
30% to 80% (for operation)
10% to 90% (for storage)
Print head life Approximately 50 km
Drop resistance
1.5 m
*Our test procedure, Not guarantee.
Dust protected,
Splash proof
IP54 Certied
*1)
If the quantity of data which is printed at once is more than 1M byte on Bluetooth communication, it would cause
the buer to overow and the data to get damaged.
*2) Under0°C,pleasechangeDensitymodeandQualitymodeofthememoryswitchsettingstoboth“High”.
IfyouwanttoprintadelicatepatternlikeBarcodeprinting,pleaseusetheprinterover0°C.