Hardware manual
- 9 -
2.3 Loading Paper
Refer to chapter 4, “Paper” (p. 19), to select roll paper that conforms to the specications.
1. Turn on the printer.
2. Put your nger on the switch for opening the cover, and then open and raise the printer cover.
3. Load the roll paper in the orientation shown in the gure below, and then pull the end of the roll
straight toward you.
4. Press down on both sides of the printer cover to close it rmly.
When you close the printer cover, make sure that it is closed on both sides.
5. Use the tear bar to cut the extra paper.
Printer Cover
Cover Open Switch