Printer User Manual
Table Of Contents
- Contents
- 1. Printer Setup
- Choosing a place for the printer
- Unpacking the printer
- Printer Components
- Installing the paper guide
- Opening the printer cover
- Removing the printer cover
- Connecting the Power Cord and turning the power ON and OFF
- Installing the ribbon cassette
- Removing the ribbon cassette
- Connecting to your computer using the parallel cable
- Ferrite Core Installation
- 2. Paper Handling
- Selecting paper types
- Cut-sheet paper
- Fanfold paper
- Loading cut-sheet paper
- Printing on cut-sheet paper
- Loading fanfold paper
- Printing on fanfold paper
- Parking fanfold paper
- Unparking fanfold paper
- 3. Control Panel Operations
- Switching between on-line and off-line
- Control panel functions in on-line mode
- Control panel functions in off-line mode
- 4. Using the EDS Mode
- About EDS Mode settings
- Entering the EDS Mode
- Selecting a EDS number
- Selecting a bank
- Selecting a switch
- Changing a switch setting
- Printing the current EDS settings
- Exiting the EDS Modes
- 5. Control Codes List
- < ESC/P-K mode>
- 6. Troubleshooting
- Short test
- Long test
- Hexadecimal dump
- Adjusting the dot alignment
- Troubleshooting guide
– 32 –
ENGLISH
Use the information in the following table to change the EDS settings.
BANK
< EDS-1>
SW OFFONFUNCTION
A
B
C
D
( Reserved )
( Reserved )
Print mode
Character pitch
LQ Font
Character table
Character set
Zero style
( Reserved )
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
1
2
3
4
5
6
7
Roman*
IBM Graphics *
#2 *
Normal *
Sanserif
Italic
#1
Slashed zero
*: Default setting
1 2
ON ON LQ (x1) *
OFF ON Draft (x3)
3 4 5
ON ON ON 10 CPI *
ON ON OFF 12 CPI
ON OFF ON 15 CPI
ON OFF OFF 17 CPI
OFF ON ON 20 CPI
OFF ON OFF Proportional