User Manual
Table Of Contents
- 8 -
2.3. Replacing Paper Roll
Cautions :
Be sure to use paper rolls that meet the specications. Do not use paper rolls
that have the paper glued to the core because the printer cannot detect the pa-
per end correctly.
1. Before opening the paper cover, ensure no data is being sent to the printer and
turn off the power.
2. Open the paper cover by pushing down the open switch and pull it up.
Caution Symbol
is symbol is placed near the thermal head to indicate that it may be hot.
Never touch the thermal head immediately aer the printer has been used.
Let the thermal head cool for a few minutes before touching it.
WARNING
1) Do not touch the tear bar.
• ere is a tear bar inside the paper outlet slot. Not only should you not put
your hand in the paper outlet slot while printing is in progress, never put your
hand into the outlet even when printing is not in progress.
• e paper cover can be opened when replacing the paper. However, since the
tear bar is on the inside of the paper cover, be careful not to place your face
or hands too close to the tear bar.
2) During and immediately aer printing, the area around the thermal head is
very hot. Do not touch it, as you could be burned.
Tear Bar
Open Switch
Paper Cover