User Guide

- 24 -
l
A buzzer will sound once when a card is successfully read.
When the printer fails to read the card, the buzzer will sound three times. Check the orientation of
the card, and slide it through the reader slot again.
Reading face of magnetic stripe
(reverse face)
Slot
3.6 Card Reading
(Only for Model with Card Reader)
Please keep the following points in mind when reading a card.
l
Swipe the card with its magnetic stripe side towards the printer.
l
Hold the card in the center as illustrated below and swipe it straight at a steady speed in the direc-
tions of arrows. You can swipe the card in either direction to read the data.
Be sure to hold the printer rmly with your hand while swiping.
If you hold the corner of the card, it is dicult to swipe it straight so that you may fail to read the
card data. So hold the card in the center when you swipe the card.