User Guide

- 18 -
Printer Mode Setting
Display
1 Communication Port
v
1)
RS-232C UART Mode
Bluetooth(Mac) Bluetooth-Mac
Bluetooth(Auto) * Bluetooth-Auto
2 Baud Rate
9600 bps 9600 BPS
19200 bps 19200 BPS
38400 bps 38400 BPS
57600 bps * 57600 BPS
115200 bps 115200 BPS
3 Data Bit
7 Data bit 7 DATA BIT
8 Data bit * 8 DATA BIT
4 Parity Bit
No Parity * NO PARITY
Odd Parity ODD PARITY
Even Parity EVEN PARITY
5 Stop Bit
1 Stop bit * 1 STOP BIT
2 Stop bit 2 STOP BIT
6 Print Density
Density Low DENSITY LOW
Density Medium * DENSITY MEDIUM
Density High DENSITY HIGH
7 Print Quality
Low (75mm/s) * LOW QUALITY
High (50mm/s) HIGH QUALITY
8 Black Mark Sensor
No use * MARK NO USE
Use MARK USE
9 Black Mark Sensor Sensitivity
Low * SENSOR LOW (167)
Medium 1 SENSOR MEDIUM1 (282)
Medium 2 SENSOR MEDIUM2 (397)
High SENSOR HIGH (512)
10 Power Down
No use * PWDN NO USE
1 Minute Sleep PWDN 1 mim Slp
v
2)
2 Minute Sleep PWDN 2 mim Slp
v
2)
3 Minute Sleep PWDN 3 mim Slp
v
2)
4 Minute Sleep PWDN 4 mim SlP
v
2)
5 Minute Sleep PWDN 5 mim Slp
v
2)
1 Minute Power O PWDN 1 mim Off
2 Minute Power O PWDN 2 mim Off
3 Minute Power O PWDN 3 mim Off
4 Minute Power O PWDN 4 mim Off
5 Minute Power O PWDN 5 mim Off
11 Auto Connection
ON * AUTO CONN ON
OFF AUTO CONN OFF
*: Defalt
Refer to the next page for
v
1 and
v
2.
[Setting Table]
Note :
To change the memory switch setting of the table below, use the buttons on the printer
or the StarPRNT Intelligence application that can be downloaded from our web site.