Manual

CHART OF POSSIBLE FIRING INTERRUPTIONS
CAUSES
1. Failure of feeding:
May be due to magazine not fully in-
serted into the grip or to magazine
dents.
a Magazine blown. 2 .
2. Failure to fire.
a Defective cartridge which prevent com-
plete locking of the pistol.
b Built-up residue in the firing chamber.
c Firing Pin broken.
d Defective cartridge primer.
3. Failure of extraction:
a Cartridge has insufficient gas pressure,
thus preventing complete backwards
stroke of the slide.
b Cartridge head (rim) broken.
c Defective extractor.
d Cartridge or case remains pressed
between breechblock and chamber.
CORRECTIONS
1.
Push the magazine completely into the
a Remove dent on magazine and if the
magazine is faulty, correct same.
a Replace the cartridge.
b Disassemble the pistol and clean the
firing chamber thoroughly.
c
May be caused by excessive dry firing.
Replace firing pin.
d Remove defective cartridge.
3.
a Remove cartridge case.
b Remove cartridge case.
c Replace the extractor.
d Draw the slide completely backwards
and while holding it back, push the
slide stop up to engage in the notch on
the slide. (Care should be taken to
prevent
any casualty while operating
with the gun). Remove magazine and
withdraw cartridge or case.