Manual

IMPORTANT INSTRUCTIONS FOR BEST PERFORMANCE OF THE PISTOLS
1. All moving parts should be lightly oiled.
2.
Clean the barrel and chamber after firing. The barrel and chamber should be cleaned
from the breech avoid cleaning from the muzzle. Always wipe off the exterior of the
pistol after use with a slightly oily cloth to protect the finish.
3. Use only standard loads for which the pistol is designed and make sure that the bore
is free from obstructions before loading and shooting.
4. Care should be taken to prevent the magazine from being dented or otherwise damaged.
NOTE: DO NOT POINT THE PISTOL, LOADED OR UNLOADED, AT ANYTHING YOU DO
NOT WANT TO SHOOT.
COMPLETE DISASSEMBLY OF THE PISTOL
Follow the same procedure as by disassembly for cleaning purposes.
Note: All the pins are removed from left to right, except the trigger pin which comes out
to the left.
Remove grips (95 & 96b) unscrewing the four screws (97).
Holding the pistol in the left hand, depress the magazine catch button (29) with the
index finger of the same hand far enough inwards to permit the catch lock (28) to be
turned to the left by means of the cleaning rod. The complete magazine catch assembly
may now be removed from the frame.