User's Manual

7
☆ It is not recommended to use the device while charging.
Plug the power adapter into an electrical wall outlet, and then connect to the
device to fully charge the battery before use (A full charge takes about 6 hours
in the off status).
Turn the device on
Press the power button briefly.
Wi-Fi Network Setup
Since many features require a Wi-Fi connection, we recommend you set up
your Wi-Fi network now.
1. Tap → Settings.
2. Slide Wi-Fi switch to turn on.
The device automatically scans and lists all local Wi-Fi Network found.
A lock indicates secure Wi-Fi networks that require input password to
connect.
3. Tap the desired network to which you want to connect → enter the
Network Password if applicable → tap Connect.
4. Tap to return to the Desktop screen.
☆ If your Wi-Fi network is set as hidden, it won’t be found by the auto
scan. Tap Add Wi-Fi network and follow the prompts to add your
network.
HDMI video play
This device support through the Mini HDMI connected with TV, it makes TV
and device displayed synchronic. For using this feature, insert the Mini HDMI
cable into the right side of the device interface to connect with TV.
TV screen adjustment
After connecting HDMI, enter into Settings → Display → TV screen
adjustment, by adjusting the drag strips in the interface to change the width
and height of the TV side.
☆ After connecting HDMI, you can press the power button to turn off the
screen, in order to get longer battery life.
USB device mode options
Before using this feature please connect to PC via the Mini USB cable.
USB debugging
Debug mode used to debug program for developers. ADB driver needs to be
installed before using this mode. Installation method as follows：
（1）First switch on the device to Install Driver mode, And then find the "CD
driver"(such as F:)on your PC，Use the resource manager to open the CD
drive , then copy all files in the folder(\adb_driver) to your PC;