User's Manual
9
Knowing the Keys
1. Left soft key/Right soft key: Implement the functions
shown in the lower left/right hand corner.
2. Call/Answer key (Green 1/2 key): Press the key to dialing,
Press if there is an incoming call to answer. Press from standby
to go to call records list.
3. End/Power key (Red key): Long press to switch phone
on/off; Press to end, reject call; or to exit a menu.
4. OK key: Confirm or accept selection in menu access.
Press from standby to enter the selected shortcuts list function.
5. Music key: Press from standby to enter the audio player
interface.
6. Navigator Keys: Press the up/down navigation key into the
shortcut function. In idle mode, press the left/right direction
keys to select the shortcut function showed on the bottom of
the screen, and then press the OK key to confirm.
7. 0-9 alphanumeric keys: Press corresponding keys to input
numbers when dialing or numbers and characters when editing.
From Standby: Long press “2” to “9” key to dial speed dial
numbers (as defined in the menu [Phonebook /Phonebook
settings / Speed dial]).
8. # Key: Press in standby to input “#” character; long press
from standby to activate or deactivate silent mode.
9.*(star)key: Press in standby to input “*” character, press the
left soft key + * key to lock or unlock the keypad in the idle
screen.
Install SIM card
This phone supports two GSM SIM cards. Find SIM card’s
10
groove in the back of the phone and slide it completely
there. During installation, please make sure the chip is
facing downwards and pay attention to slot direction.
Note:
1. Keep SIM card out of children’s touch.
2. Any abrasion or folding could easily damage SIM
card, so please be extremely careful when you insert,
Remove and preserve it.
3. Please make sure that you have cut off the power
supply and have taken out battery before you remove
SIM card.
Install T-flash card
1. First switch off the phone and remove the battery.
2. T card metal piece down, in accordance with the direction of
the logo on the cover of the phone, T-Flash card inserted in the
slot
Note:
1.To avoid damaging memory card, please do not plug
memory card fast or frequently.
2. Please regularly backup information in the cards on
other equipment when you use Cards like T-flash!
Improper use or other uncertain factors may cause the
damage or loss to the content in the cards.
Installing Battery
Align the battery chip with the metallic salient point in battery jar,
insert the battery until it is inserted into the battery jar. Slide
battery cover into back of the phone until it is locked.
Battery Charging
insert one end of the charger, i.e., the charging plug into
attachment mode and the other end into electrical outlet,
Screen will display the charging sign. After charging is finished,
just pull out the plug.
Note:
1. Please use the standard battery and charger, or may