User's Manual

47
View SIM1/SIM2 sent and received Message quantity.
GPRS counter
View the GPRS data volume on the network.
Call settings
SIM call settings
Call waiting:
You can choose to Activate, Deactivate or Query status of this
feature.
Activate this feature, if you call any other incoming call, the
phone beeps, and the screen will display the caller number or
name and call waiting information.
Call divert:
This feature allows you to play to your phone calls transferred
to your voice mailbox or another phone number you specify.
This function needs the support of network operator, please
contact the network operator.
Transfer in the following ways, each way can be set to enable,
disable, and query status. When turned on, the on-screen
prompts to transfer the phone number.
Divert all voice call: Transfer all voice calls to your settings in
the phone number or voice mail
Divert if unreachable: When your phone is off or not on the
network service area, the transfer of all voice calls to your
phone number or set voice mail
Divert if no answer: No answer transfer all voice calls to your
phone number or set voice mail
Divert if busy: When the call is busy, the transfer of all voice
calls to your phone number or set voice mail
Divert all data calls: Transfer all the data calls to the phone
number you set, this function is supported by the network
operator, please contact the network operator.
Cancel all diverts: cancel all call forwarding type.
Call barring:
Set limits each case to answer or dial the phone. Network
48
operators must first apply for international calling features, and
limit access network password, to set the limit function.
This function needs the support of network operator, please
contact the network operator.
Call restrictions can be set for activate, deactivate and query
status
Line switching:
Can switch to Line 1 or Line 2, Line 1 is default, if you choose
line 2, then there may be no phone call.
- Advanced settings
Blacklist
You can on or off this feature to edit the blacklist number, up to
20 numbers can be edited. Open the function, the blacklist
numbers you call, the other shows you are on the phone, and
your phone is in a state of no response.
Auto redial
You can enable or disable this feature, the feature is turned on,
after the dial-up, then if the other party does not answer the
phone over a period of time will be automatically re-dial, redial
the number up to 10 times, in this period, the user can not call
any other phone , to end the re-dial, simply press the right soft
key to cancel.
IP dial
You can edit IP number with three at most.
Select one and press the OK key or press the Left soft key
[Options] to select ‘Edit’ option, then edit the IP number, press
the OK key or press the Left soft key to confirm and the current
IP number is both activated.
For the edit IP number, you can press the Left soft key [Options]
to select ‘Activate’ option.
Call time reminder
Can set the prompt type:
Off: When the phone call, no minutes of tone.
Single: Select 1-3000 seconds after the prompt enter either of