User's Manual

21
name and call waiting information.
Call divert:
This feature allows you to play to your phone calls transferred
to your voice mailbox or another phone number you specify.
This function needs the support of network operator, please
contact the network operator.
Transfer in the following ways, each way can be set to enable,
disable, and query status. When turned on, the on-screen
prompts to transfer the phone number.
Divert all voice call: Transfer all voice calls to your settings in
the phone number or voice mail
Divert if unreachable: When your phone is off or not on the
network service area, the transfer of all voice calls to your
phone number or set voice mail
Divert if no answer: No answer transfer all voice calls to your
phone number or set voice mail
Divert if busy: When the call is busy, the transfer of all voice
calls to your phone number or set voice mail
Divert all data calls: Transfer all the data calls to the phone
number you set, this function is supported by the network
operator, please contact the network operator.
Cancel all diverts: cancel all call forwarding type.
Call barring:
Set limits each case to answer or dial the phone. Network
operators must first apply for international calling features, and
limit access network password, to set the limit function.
This function needs the support of network operator, please
contact the network operator.
Call restrictions can be set for activate, deactivate and query
status
Line switching:
Can switch to Line 1 or Line 2, Line 1 is default, if you choose
line 2, then there may be no phone call.
- Common call settings
22
Call time reminder; Can set the prompt type
Off: When the phone call, no minutes of tone.
Single: Select 1-3000 seconds after the prompt enter either of
the time, when you call the phone at the time when prompted.
Periodic: Select 30-60 seconds after the input in any one time,
when you call for every minute the phone will be reminded of
the time.
Call time display: press the OK key or the left soft key to on/off
the time display when you call.
Auto redial:
You can enable or disable this feature, the feature is turned on,
after the dial-up, then if the other party does not answer the
phone over a period of time will be automatically re-dial, redial
the number up to 10 times, in this period, the user can not call
any other phone , to end the re-dial, simply press the right soft
key to cancel.
IP dial: you can edit IP number and activate.
Answer mode:
Any key: Select the feature, all incoming calls, in addition to the
red key and right soft keys, all keys can answer the call
Auto answer Enable this feature, when the phone have
incoming call, the phone will automatically answer the call.
Network settings
Can be set automatically or manually select the network, select
Automatic, the phone will be SIM card based on the network
where the first selection, select Manual, you need to select the
SIM card registered with the network operator can use the
same network
Network status
Can view the current network status.
Security Settings
SIM security
You can use the PIN code, PIN2 code, set the boot password
and set security features to protect information security.