USER MANUAL
IMPORTANT TO SAFETY IMPORTANT TO SAFETY NOTE: This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5℃ 41℉ - 35℃ 95℉. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used.
SAFETY INSTRUCTIONS 1. Read Instructions － All the safety and operating plugs, convenience receptacles, and the point where they exit from the appliance. instructions should be read before the appliance is 13. Cleaning - The appliance should be cleaned only as operated. 2. Retain Instructions － The recommended by the manufacturer. safety and operating Clean by wiping with a cloth slightly damp with water. instructions should be retained for future reference.
NOTE ON USE • • • • • • • • Allow for sufficient heat dispersion when installed on a rack. Handle the power cord carefully. Hold the plug when unplugging the cord. Keep the set free from moisture, water, and dust. Unplug the power cord when not using the set for long periods of time. Do not obstruct the ventilation holes. (For sets with ventilation holes.) Do not let foreign objects in the set. Do not let insecticides, benzene, and thinner come in contact with the set.
MAIN FEATURES CONTROL UNIT 1 16 4 9 3 12 10 2 1314 15 11 5 6 7 8 18 1 16 4 9 17 1314 15 11 3 12 10 2 5 CONNECT TO MAIN UNIT CONNECT TO MAIN UNIT 2 1 CONTROL 6 17 CONTROL 2 19 7 8 1 19 20 20 (11)CUE (Cue Button) (12)PROG. (13)B.SKIP (14)SEARCH/SCAN (15)SEARCH/SCAN (16)F.
PREPARATIONS 1. Checking the Contents Check that the carton contains the following items: 1) Main unit 2) Control unit 3) Operating instructions (this booklet) 4) Pair of RCA pin cord. 5) Control cords (1 meter) 2. Installing the Unit Mount the unit onto your console or rack with 19" EIA rack rails. CAUTION: l The player will work normally when the main unit is mounted with the front panel at within 15 degrees of the vertical plane.
NAMES AND FUNCTIONS Main Unit Front Panel (1) POWER (Power ON/OFF Switch) When the POWER switch is pressed, the power turns on. (2) Disc Holder Place the discs in the holder. Press the OPEN/CLOSE button to open and close the disc holder. (3) OP/CL Press it to open and close the disc holder. The control unit also includes OP/CL button. The disc holder cannot be opened during playback, so stop playback before pressing the button.
OPERATIONS 1. Opening and Closing the Disc Holder l l Turn the unit power on. Press the OPEN/CLOSE button to open the disc holder. OPEN/CLOSE buttons are provided on both the main unit and control unit. The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally. Stop the playback first, then press the OPEN/CLOSE button. 2.
OPERATIONS 6. Pausing l l l Press the PLAY/PAUSE button to switch between the play and pause. The pause indicator lights when the pause mode is set. Figure 6-1 show the relationship between the play and pause. 2 4 6 3 7 1 5 Figure 6-1 ŒThe player has completed the cue or pause operation and is waiting for the play start command. •When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the memory. ŽPlaying.
OPERATIONS 8. Frame search l l l Frame search is a function for monitoring the sound at a certain section of the disc and manually changing the position. Searching is used to set play start points with precision. or while in pause or cue mode to begin searching. The sound for one revolution of the disc is Press the output repeatedly. The point at which the sound starts is indicated on the LCD. If the time display and the CUE point are the same, the CUE indicator lights. 9.
OPERATIONS 12. Program play Œ Press the PROGRAM button, the player will enter the program mode and the CD will stop rotating. • Select the desired track by pressing the SKIP button, then press the PROGRAM button again. The selected track will be added to the program sequence. Ž Repeat step 2 operation. A maximum of 20 tracks can be programmed at one time. • Press the PLAY/PAUSE button to start the program play from the first selection. • Press the program button again during program play to stop play.
BEFORE SWITCHING OFF THE POWER When you have finished using the CD player, before switching off the power, be sure that the disc holder had been closed with the OPEN/CLOSE button. CAUTION: Do not forcibly close the disc holder when the power is off. POWER OFF POWER OFF û Do not switch off the power when the disc holder is open. Switch off the power after the disc holder has been closed with the OPEN/CLOSE button. COMPACT DISCS Ÿ 1.
