RM-50 Professional DJ mixer OWNER’S M A N U A L © 2001, Stanton Magnetics, LLC STANTON MAGNETICS, LLC info@stantonmagnetics.
T RO U B LE S H O OT I N G Thank you for making Stanton your first choice in professional DJ mixers. This new, innovative family of mixers has been developed with input from the professional DJ community, bringing to the marketplace a previously unavailable, affordable combination of user-friendly, functional design, rugged construction, and professional quality features. Problem Cause Solution Excessive hum when using phono source. Poor ground connection.
D E S C R I P T I ON O F F U N C TI O N S 1. BNC jack: 12V gooseneck light input 2. Power switch: Selects power "ON" or "OFF" 3. Mono/stereo switch: switches the of Master output between a stereo and mono signal 4. Master balance control: Controls left/right signal balance of the master output. 5. Headphone level control: Controls the overall headphone output level. It is recommended headphones with an impedance rating of 200 ohms or less be used for maximum volume. 6.
FA D E R C LE A N I N G TE C H N I C A L S P E C I FI C AT I O N S 3. Shake and wipe off excess fluid before re-assembling the fader. Line inputs: Phono inputs: DJ mic input: Master output: Booth output: Record output: Headphone output: Frequency Response: Tone Control : Mic Tone: Gain Control: S/N Ratio: T.H.D: Dimension(LxWxD): FA D E R R E P L AC E M E N T WA R R A N T Y The RM-50 faders may need lubrication from time to time.
