Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 C.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 IMPORTANT SAFETY PRECAUTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use the apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 INFORMATION Thank you for purchasing Stanton’s newest innovation in professional tabletop CD players. The C.324 offers up hot new features and sleek design with unmatched reliability, engineered to bring ultimate performance and control to even the most discerning artist.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 CONTROL OVERVIEW 1 7 4 2 3 TOP PANEL 35 6 11 8 9 14 10 12 13 35 16 34 15 17 33 18 19 20 32 31 21 22 30 29 23 28 27 26 24 25 1. TIME – Switches the time value displayed on the LCD between elapsed track time, remaining track time, and the total remaining time for the entire disc. Markers next to the time readout indicate which of these modes is enabled. 7.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 CONTROL OVERVIEW TOP PANEL after the disc has been ejected. The sampler pitch can be adjusted by turning the TIME KNOB, or by pressing the button down and rotating the JOG WHEEL simultaneously. The sampler volume can be adjusted by turning the RATIO KNOB or by pressing the button down and rotating the JOG WHEEL simultaneously. By using the SAMPLE MODE button (section #34), samples can be played once, or looped continuously. 14.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 CONTROL OVERVIEW REAR PANEL 36. AUDIO OUT – This analog output signal requires a pair of RCA cables (left and right) to be connected to a line level input. 37. DIGITAL OUT – This digital output signal requires one S/PDIF (75Ohm, coaxial) cable to be connected to a S/PDIF input on your mixer or computer. 38. FADER START/ RELAY – This connection allows two CD players to be linked for relay play.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 SET UP CHECKING THE CONTENTS CONNECTIONS Check that the carton contains all of the following items. Make sure that the unit and any other equipment in the signal chain are turned off prior to making any connections. Tabletop CD player unit Connect the RCA cable to the rear of the unit and to the input on your mixer. Printed user’s manual One RCA cable Connect the power cable to the rear of the unit and to a proper AC outlet.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 OPERATING INSTRUCTIONS Once the PITCH BEND + button is released the pitch will return to the pitch set by the PITCH SLIDER. The jog wheel can also be used to temporarily bend the pitch of the music during normal playback. Rotate the wheel clockwise to speed up and counterclockwise to slow down. The speed that you rotate the jog wheel determines the percent of pitch bend.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 OPERATING INSTRUCTIONS LOOPS Clearing the Pads Press the CLEAR button (#27). While it is flashing, press the pad(s) you wish to clear and those will also flash red. Press CLEAR once more to complete the process, and the pad lights will now turn off, letting you know that there is no information stored in them. Press and hold the CLEAR button, then press the pad.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 OPERATING INSTRUCTIONS To record a BPM synchronized real-time sequence: Program several sample cues by pressing the pads. Ensure that the SAMPLER button is not lit. Hit the RECORD button. The real-time sequence recording is now armed and the RECORD button blinks. If a previous sequence had been recorded then the PLAY button will become unlit. Select the beat division indicator to set the desired sequence recording length.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 OPERATING INSTRUCTIONS JOG WHEEL SENSITIVITY FADER START The touch sensitivity of the jog wheel can be adjusted to fit the needs and feel of different users. When adjusting the sensitivity, be conscious of extreme settings which may affect your performance. Setting the sensitivity too high would engage the touch sensitivity with the hand just above the wheel.
Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12 SPECIFICATIONS APPLICATION Model C.324 POWER SUPPLY AC 100V, 50/60Hz (For Japan) AC 110V, 60Hz (For Taiwan) AC 120V, 60Hz (For U.S.A., Canada, Mexico) AC 220V, 50Hz (For United Arab Emirates, Chile, Argentina) AC 220V, 60Hz (For Philippines) AC 230V, 50Hz (For Europe, New Zealand, South Africa, Singapore, Israel) AC 240V, 50Hz (For Australia, U.K.) POWER CONSUMPTION: 17W DIMENSIONS 318 (W) x 358 (D) x 109.5 (H) mm WEIGHT 4.
