DIGIPAK PRO.
IMPORTANT SAFETY PRECAUTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read Instructions – All the safety and operating instructions should be read before this product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the appliance and in the operating instructions should be followed. Follow Instructions – All operating and use instructions should be followed.
INFORMATION Thank you for purchasing Stanton’s newest innovation in professional tabletop CD players. The C.324 offers up hot new features and sleek design with unmatched reliability, engineered to bring ultimate performance and control to even the most discerning artist. Designed for DJs who want to play and scratch CDs just like vinyl, our flagship tabletop CD player features a large touch-sensitive jog wheel, making it possible to mix, scratch, and beat juggle just like using a turntable.
CONTROL OVERVIEW M.212 1 15 2 14 13 3 12 4 5 11 6 10 7 8 1. Channel Gain - Adjusts the pre-fader volume for cleaner sound. Reduce the channel gain if you notice the level indicators flashing red. 2. Mic Input Gain - Adjusts microphone input level. 3. Mic EQ - The mic channel includes a two-band EQ with a range of +10dB to -10dB. 4. Channel EQ - Adjusts the high, mid and low frequency levels of the input channels for either making the treble or bass louder or to be used as an effect. 5.
CONTROL OVERVIEW M.212 18. Fader Start Control Jacks - Connect these jacks to the Fader input jacks of the CD player using the 3.5mm stereo mini cord. 19. Master Output - Unbalanced RCA connectors controlled by the Master level. 20. Line Inputs - Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players, HiFi VCRs, cassette decks, DAT machines, laser discs, tuners, even synthesizers or other mixing consoles.
SPECIFICATION M.212 INPUT / OUTPUT IMPEDANCE & SENSITIVITY: (MASTER 0 DBV OUTPUT LINE PHONO MIC MASTER PHONES 10K OHM /-14dBV (200mV) +/-2dB 47K OHM /-50dBV (3.16mV) +/-2dB 2.2K OHM /-60dBV (1mV) +/-2dB 1K OHM 33 OHM / 0dBV (1V) ±2dB MAX. OUTPUT (THD=1% , Maximum gain, EQ flat) MASTER MORE THAN +18dBV (8.0V) at load=100K OHM PHONES MORE THAN +4dBV (1.
CONTROL OVERVIEW 1 7 4 2 3 C.324 35 6 11 8 9 14 10 12 13 35 16 34 15 17 33 18 19 20 32 31 21 22 30 29 23 28 27 26 24 25 1. TIME – Switches the time value displayed on the LCD between elapsed track time, remaining track time, and the total remaining time for the entire disc. Markers next to the time readout indicate which of these modes is enabled. 7.
CONTROL OVERVIEW C.324 14. FX SELECT – These six buttons refer to each of the individual DSP effects. Press once to engage (illuminated) and press again to disengage. Use the TIME KNOB, RATIO KNOB, MINUS BUTTON, and PLUS BUTTON to fine tune the parameters used for these FX. For the Filter effect, pressing once engages or disengages the autofilter effect (illuminated red). Holding down the button engages the manual filter effect (illuminated green). after the disc has been ejected.
CONTROL OVERVIEW C.324 36. AUDIO OUT – This analog output signal requires a pair of RCA cables (left and right) to be connected to a line level input. 37. DIGITAL OUT – This digital output signal requires one S/PDIF (75Ohm, coaxial) cable to be connected to a S/PDIF input on your mixer or computer. 38. FADER START/ RELAY – This connection allows two CD players to be linked for relay play. This can also be connected to a mixing board that supports automatic fader start. 39.
SETUP C.324 CHECKING THE CONTENTS CONNECTIONS Check that the carton contains all of the following items. Make sure that the unit and any other equipment in the signal chain are turned off prior to making any connections. Tabletop CD player unit One RCA cable Connect the RCA cable to the rear of the unit and to the input on your mixer. One power cable Connect the power cable to the rear of the unit and to a proper AC outlet.
OPERATING INSTRUCTIONS STARTING PLAYBACK C.324 Once the PITCH BEND + button is released the pitch will return to the pitch set by the PITCH SLIDER. The jog wheel can also be used to temporarily bend the pitch of the music during normal playback. Rotate the wheel clockwise to speed up and counterclockwise to slow down. The speed that you rotate the jog wheel determines the percent of pitch bend.
OPERATING INSTRUCTIONS LOOPS C.324 Clearing the Pads Press the CLEAR button (#27). While it is flashing, press the pad(s) you wish to clear and those will also flash red. Press CLEAR once more to complete the process, and the pad lights will now turn off, letting you know that there is no information stored in them. Press and hold the CLEAR button, then press the pad. It should now light red to indicate that it has been selected; release the CLEAR button, the selected pad will be immediately deleted.
OPERATING INSTRUCTIONS C.324 SAMPLE mode LED on To record a BPM synchronized real-time sequence: Program several sample cues by pressing the pads. Ensure that the SAMPLER button is not lit. Hit the RECORD button. The real-time sequence recording is now armed and the RECORD button blinks. If a previous sequence had been recorded then the PLAY button will become unlit. Select the beat division indicator to set the desired sequence recording length.
OPERATING INSTRUCTIONS C.324 JOG WHEEL SENSITIVITY FADER START The touch sensitivity of the jog wheel can be adjusted to fit the needs and feel of different users. When adjusting the sensitivity, be conscious of extreme settings which may affect your performance. Setting the sensitivity too high would engage the touch sensitivity with the hand just above the wheel. Setting the sensitivity too low may not engage the touch even while pressing firmly on the wheel.
SPECIFICATIONS C.324 APPLICATION Model C.324 POWER SUPPLY AC 100V, 50/60Hz (For Japan) AC 110V, 60Hz (For Taiwan) AC 120V, 60Hz (For U.S.A., Canada, Mexico) AC 220V, 50Hz (For United Arab Emirates, Chile, Argentina) AC 220V, 60Hz (For Philippines) AC 230V, 50Hz (For Europe, New Zealand, South Africa, Singapore, Israel) AC 240V, 50Hz (For Australia, U.K.) POWER CONSUMPTION: 17W DIMENSIONS 318 (W) x 358 (D) x 109.5 (H) mm WEIGHT 4.
WARRANTY & RETURN POLICY Warranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one year following the date of original purchase.
