Magnetics Deck Control Surface User Manual

7

3.2 EncoderSection

Thissectionconsistsoffourrotarypushencoders,eachwith
an LED encoder ring to indicate the value of the encoder,
andanLCD“scribblestrip”thatcanbeusedtoindicatethe
functionalityofeachencoder.Encodersareusedtocontrol
variable parameters such as effect levels. Encoders do not
physically stop when you turn them; instead th
e LED
encoder rings indicate the position of the control you are
adjusting.


3.3 TriggerSection

The trigger section consists of four velocity sensitive pads,
fourLCD“scribblestrips”,andsevenclickingswitches.Each
pad, switch and screen is backlit by multicolor (red, green,
orange)LED’s. The velocity sensitive pads and  switches are
typically assigned to trigger actions such a playing cue
points, moving loops or killing freque
ncies. The LCD
“scribble stri
ps” will display functionality and status
dependingonthepreset.
