Datasheet
EU-Safety data sheet according to 91/155/EU
Seite: 1(3)
Trade Name: WF305 S Liquid flux
Date of issue: 12.02.2004 Revised on: 20.02.2007
1. Chemical Identification
Trade Name:
WF 305 S Liquid Flux
Manufacturer:
Stannol GmbH
Oskarstr.3-7
42283 Wuppertal
Phone.: ++49 202 / 5850 sec.phone:-++49 202 / 585119
Phone: ++49 202 / 585118
2. Composition/Information of Ingredients
Chemical characteristic: Watery solution of a mixture of carboxylic acids, wetting and conserving additives
Ingredients :
Content CAS-Nr. Symbols Risk-Phrases Chemical name
<3% Xi 36 Mixture of carboxylic acids
3. Hazards Identification:
This is not a chemical composition classified as dangerous. nevertheless for safety reasons refer to all following items
4. First Aid Measures:
General : If casualty is unconscious but breathing, place in the recovery position. If breathing has stopped
apply artificial breathing or give oxygen by mask
Inhalation Remove patient to fresh air..
Skin Contact : Wash hands with soap and water after contact. If any irritation resists, obtain medical attention.
Eye Contact:
Flush immediately with plenty of water. In cases where spitting flux has entered the eye seek
medical attention.
After swallow: seek medical attention.
Hints
Inhalation of the flux fumes given off at soldering temperatures will irritate the nose, throat and
respiratory system. Repeated or prolonged exposure to flux fumes may cause shortness of
breath and cough.
.
Treatment: Decontamination, symptomatic treatment.
5. Fire Fighting Measures
Extinguishing Media: Use extinguishing media appropriate to surrounding fire conditions



