Datasheet

The mentioned values are typical and represent no form of specification. The Data Sheet serves for information purposes. Any verbal or written advise is not binding for the
company, whether such information originates from the company offices or from a sales representative. This is also in respect of any protection rights of third parties, and
does not release the customer from the responsibility of verifying the products of the company for suitability of use for the intended process or purpose. Should any liability
on the part of the company arise, the company will only indemnify for loss or damage to the same extent as for defects in quality.
TDB_LD_Kristall_Serie_EN Page 2 of 2 Issue: 27.08.12
STANNOL GmbH
Oskarstraße 3-7 • 42283 Wuppertal • Tel. [phone] • Telefax [phone] • E-Mail [e-mail] • Web www.stannol.de
Wenn’s ums Löten geht
When it’s about soldering
Quand il s’agit du soudage
®
STANNOL
Should residue quantity be an important consideration, STANNOL
®
X39B flux cored wire may be specified if a halide free product is
required. STANNOL
®
Kristall 502, 505 and 511 offer good activity and consequently cored wire flux contents and hence residue
levels may be reduced in comparison with equivalent conventional products.
Should cleaning be required, this is best achieved using STANNOL
®
Flux-Ex 200B or STANNOL
®
Flux-Ex 500 solvent cleaner.
Other proprietary solvent or semi-aqueous processes may be suitable but saponification is not recommended.
General Tests Kristall 400 Kristall 502 Kristall 505 Kristall 511
J-STD-004
- solder spread mm
2
- corrosion test
210
pass
310
pass
315
pass
340
pass
SIR Test (without cleaning)
- IPC-SF-818 Class3
- Bellcore TR-NWT-000078
pass
pass
pass
pass
pass
pass
pass
pass
Electromigration Test (without cleaning)
- Bellcore TR-NWT-000078
pass
pass
pass
pass
Classification
- J-STD-004
- IPC-SF-818
RE L0
LR3CN
RE L1
MR3CN
RE M1
MR3CN
RE M1
MR3CN
Physical Properties and Data
General properties
Kristall 400
Kristall 502
Kristall 505
Kristall 511
Flux Type
IEC 61190-1-3
DIN EN 29454-1
REL0
1.2.3.
REM1
1.2.2.
REM1
1.2.2.
REM1
1.2.2.
Flux content:
2.2% ± 0.3% 3.0% ± 0.3% 2.7% / 3.0% ± 0.3% 2.7% / 3.0% ± 0.3%
Acid Value mg/KOH/g
215
170
170
170
Halide content:
none
0.2 %
0.5 %
1.1 %
Corrosion effect:
none, according to DIN 8516
Standard alloys
acc. to ISO 9453:2006
FLOWTIN
®
= with micro
additives <0.05%
lead-containing:
S-Sn60Pb40
S-Sn60Pb40
S-Sn60Pb40
S-Sn60Pb40
S-Sn62Pb36Ag2 on request on request on request
lead-free (ECOLOY
®
Series):
ECOLOY
®
TC
(S-Sn99Cu1) - not patented
on request on request
ECOLOY
®
TC
(S-Sn99Cu1) - not patented
ECOLOY
®
TSC
(S-Sn95Ag4Cu1)*
on request on request
ECOLOY
®
TSC
(S-Sn95Ag4Cu1)*
on request on request on request
ECOLOY
®
TSC305
(S-Sn96Ag3Cu1)
lead-free (FLOWTIN
®
Series):
FLOWTIN
®
TC**
(Sn99Cu1)
on request on request
FLOWTIN
®
TC**
(Sn99Cu1)
FLOWTIN
®
TSC**
(Sn95Ag4Cu1)
on request on request
FLOWTIN
®
TSC**
(Sn95Ag4Cu1)
FLOWTIN
®
TSC305**
(Sn96Ag3Cu1)
on request on request
FLOWTIN
®
TSC305**
(Sn96Ag3Cu1)
FLOWTIN
®
TSC0307**
(Sn98Cu1Ag)
on request on request
FLOWTIN
®
TSC0307**
(Sn98Cu1Ag)
Available diameters:
from 0.3 mm
Available reel sizes:
250 g, 500 g, 1 kg
* The use of this solder can mean that solder joints / soldered parts on products, which are destined for export to the USA, can become patent-protected and therefore liable to licence fees.
As a licence holder, we can discharge the royalties for our clients. Please contact us.
** These alloys are partially subject to minimum order quantities
Other alloys, flux contents or reel sizes are available on request.
Health and Safety
Before using please read the material safety data sheet carefully and observe the safety precautions described.