Datasheet

DESCRIPTION
TECHNICAL DATA
INCLUDED
Art.-No. 249430
ST-80 Lithium Ion Battery Soldering Iron
Charger
Soldering Tip Removing Tool
Manual
AVAILABLE ACCESSORIES
Art.-No. 249431 USB Charging Cable
Art.-No. 249432 Pencil Tip
Art.-No. 249433 Chisel Tip
Charger
Prim. Sec.
Soldering
Iron
Li-Ion-
Battery
Charge time Working time
Heating-up
time
Max.
Temperature
100-230V
50/60Hz
190mA
4,2V=
1000mA 3,6V=/6W 2000mAh ca. 3,5h ca.75min ca. 25sec 450°C
LITHIUMION
BATTERY SOLDERING IRON
The new ST-80 lithium ion battery
soldering iron takes advantage of
modern battery technology, making
this soldering tool a persistent com-
panion wherever mobile soldering
without power supply is needed. The
soldering iron is designed for solde-
ring in electronics, electrical enginee-
ring or mechanics. So it is ideal for
service technicians, but also for many
applications such as in the automotive
sector, or in the model making and DIY.
The ST-80 impresses with its fast star-
tup and short heating time. In parti-
cular the long working time distingu-
ishes it significantly from previously
available battery soldering irons.
Using an enclosed AC charger, the ST-
80 is recharged quickly. Because of
the lithium-ion technology there is no
need for a full charge, so that the ST-
80 is ready for quick usage after a very
short time. An LED on the charger in-
dicates the charge status of the ST-80.
With a special adapter cable the ST-80
can be charged by a USB port (PC) or
an external power pack. This allows
an extended mobility, regardless of a
power supply, batteries, or other spe-
cial auxiliary materials such as gas
soldering irons. The ST-80 is equipped
with a plugged tip. This can be quickly
replaced by a new or different tip.
The soldering iron heats up just as
long as the On / Off button is pressed.
This will increase safety, as the unit
automatically shuts off. This avoids
unnecessary heating and will therefore
extend the working time and increase
tip life time. The very short warm-up
still allows continuous work flow.
Available in April / May 2013
STANNOL GmbH, Oskarstr. 3–7, D-42283 Wuppertal, Tel [phone], Fax [phone], E-Mail: info
@
stannol.de, www.stannol.de
All information without guarantee of completeness and correctness. Subject to technical changes. STANNOL 03-2013