Datasheet

Page 2/7
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 11.12.2019 Revision: 11.12.2019Version number 5.4
Trade name: Flux-Gel HX21
(Contd. of page 1)
50.0.2
·
Results of PBT and vPvB assessment
·
PBT:
Not applicable.
·
vPvB:
Not applicable.
SECTION 3: Composition/information on ingredients
·
3.2 Mixtures
·
Description:
Mixture of substances listed below with nonhazardous additions.
·
Dangerous components:
CAS: 6915-15-7
EINECS: 230-022-8
l-Malic acid
Skin Irrit. 2, H315; Eye Irrit. 2, H319
2.5-15%
CAS: 110-91-8
EINECS: 203-815-1
morpholine
Flam. Liq. 3, H226; Skin Corr. 1A, H314; Acute Tox. 4, H302; Acute Tox. 4, H312;
Acute Tox. 4, H332
2.5-15%
CAS: 1341-49-7
EINECS: 215-676-4
ammonium bifluoride
Acute Tox. 3, H301; Skin Corr. 1B, H314
≤1%
·
Additional information:
For the wording of the listed hazard phrases refer to section 16.
SECTION 4: First aid measures
·
4.1 Description of first aid measures
·
General information:
Immediately remove any clothing soiled by the product.
·
After inhalation:
In case of unconsciousness place patient stably in side position for transportation.
·
After skin contact:
Immediately wash with water and soap and rinse thoroughly.
·
After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.
·
After swallowing:
Drink plenty of water and provide fresh air. Call for a doctor immediately.
·
4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available.
·
4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION 5: Firefighting measures
·
5.1 Extinguishing media
·
Suitable extinguishing agents:
Use fire extinguishing methods suitable to surrounding conditions.
·
5.2 Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
·
5.3 Advice for firefighters
·
Protective equipment:
Mouth respiratory protective device.
SECTION 6: Accidental release measures
·
6.1 Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation
Wear protective clothing.
·
6.2 Environmental precautions:
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
·
6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralising agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
·
6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
(Contd. on page 3)
GB