Datasheet

Page 1/7
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 11.12.2019 Revision: 11.12.2019Version number 5.4
50.0.2
SECTION 1: Identification of the substance/mixture and of the company/undertaking
·
1.1 Product identifier
·
Trade name: Flux-Gel HX21
·
1.2 Relevant identified uses of the substance or mixture and uses advised against
·
Technical function
soldering
·
Application of the substance / the mixture
Soldering flux
·
1.3 Details of the supplier of the safety data sheet
·
Manufacturer/Supplier:
Stannol GmbH & Co. KG
Haberstrasse 24
D-42551 Velbert
[phone]
[e-mail]
·
Further information obtainable from:
Product Safety Department
·
1.4 Emergency telephone number:
8:00 am - 5:00 pm (CET) [phone]
SECTION 2: Hazards identification
·
2.1 Classification of the substance or mixture
·
Classification according to Regulation (EC) No 1272/2008
Skin Corr. 1B H314 Causes severe skin burns and eye damage.
Eye Dam. 1 H318 Causes serious eye damage.
·
2.2 Label elements
·
Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.
·
Hazard pictograms
d~
GHS05
·
Signal word
Danger
·
Hazard-determining components of labelling:
morpholine
·
Hazard statements
H314 Causes severe skin burns and eye damage.
·
Precautionary statements
P260 Do not breathe mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or
shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P310 Immediately call a doctor.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
·
2.3 Other hazards
Flux / flux gels:
Inhalation of vapors released during the soldering process should be avoided. Flux vapors irritate the nose, throat, and
respiratory tract, and can lead to allergic reactions (asthma) after prolonged or repeated contact. Therefore, an active
suction is recommended.
After working with the product and before eating, drinking or smoking, wash your hands with soap and water.
Keep out of the reach of children.
(Contd. on page 2)
GB