Datasheet

The above values are typical and represent no form of specification. The Data Sheet serves for information purposes. Any verbal or written advise is not binding for
the company, whether such information originates from the company offices or from a sales representative. This is also in respect of any protection rights of third
parties, and does not release the customer from the responsibility of verifying the products of the company for suitability of use for the intended process or purpose.
Should any liability on the part of the company arise, the company will only indemnify for loss or damage to the same extent as for defects in quality.
TI_FG_ FluxGele_EN.doc Page 3 of 6 Issue: 28.04.06
STANNOL GmbH
Oskarstraße 3-7
•
42283 Wuppertal
•
Tel. [phone]
•
Telefax [phone]
•
E-Mail [e-mail]
•
Web www.stannol.de
Wenn’s ums Löten geht
When it’s about soldering
Quand il s’agit du soudage
The activators for flux-gels are similar to those in solder creams. The chemical activity,
their potential to react with oxides will influence the wetting of the solder. But on the other
side they influence the reactivity of the residues. Therefore all flux gels are No-Clean
products with the exception of the water soluble type.
Properties and Data:
Smart-Gel
No. 8D
Kolopaste
No. 8
Flux-Gel
RMA04
Flux-Gel
135
Multifix
450-01
HX21
EN 29454 / ISO9454 1.1.3 1.1.3 1.1.2 1.1.2 1.2.3 2.1.2
Colour yellow yellow yellow yellow white yellow
Solid content/ % 53 57 72 65 55 90
V
iscosity/ green needle, 2 bar
(dosing at 23°C) / mg
170 120 0,8 3,8 4,8 49
Density (20°C) / g/cm
3
0,93 0.93 0,95 0,95 0,82 1,0
Flashpoint (cc) / °C: 19 19 109 111 >100 >120
Ignition temperature / °C >325 >325 >325 >325 >325 >325
It is worth to regard the colour of the gels, which are given by the type of resin which is
contained. Dark amber to colourless gels are available. Multifix 450-01 is colourless
using the same resins which are used for solid flux Kristall 400, a mix of synthetic resins.
The water-soluble Flux-Gel Type HX21 is also colourless or yellow at ambient conditions.