Datasheet

EU-Material-safety-data-sheet according to 91/155/EWG
Page: 2(2)
Trade-name: Solder-wire KS115 ECOLOY ® TSC
Date of issue: 22.09.2005 Revised: 25/05/2007
8.Exposure Controls / Personal Protection:
Local exhaust or dilution ventilation and control of process conditions are suitable methods..
TLV of TRGS 900 see Capitel 2
Substance CAS-No ml/m³ (ppm) mg/m³ Art
Tin 7440-31-5 2 MAK (NL)
Silver 7440-22-4 0,1 MAK(DFG)
Copper 7440-50-8 1 MAK (DFG)
Respiratory Protection: If concentrations are over the exposure limit, use a supplied air respirator.
Hand Protection: : Use heat resistant gloves if required.
Eye Protection: Operators should wear goggles
9. Physical and Chemical Properties
Appearance and Odour: Tin-Silver CopperSolder
Melting Point: 217 °C
Vapour Pressure: n.a.
Density(20°C): 7-8 g/cm³
10. Stability and Reactivity:
Dangerous reactions: Possible with oxidising agents.
Hazardous combustion or decomposition products: none
11. Toxicological Information
Acute Effects:
None toxic metal.
12. Ecological Information:
No effect to environment known
13. Disposal Considerations:
Contact a licensed professional waste disposal service to dispose of this material.
Observe all federal, state and local environmental regulations. Collect metal for recycling
14. Transport Information:
GGVS/ADR/RID: The product is not classified as hazardous for transport
15. Regulatory Information:
Not subject to current legislation
16. Other Information:
Cause of modification:
General revision
Other information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide..
Safety data-sheet is written by:
Save of quality/laboratory
Contact - person:
Dr. W. Kruppa