Datasheet

Page 3/6
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 02.07.2018 Revision: 02.07.2018Version number 5
Trade name: Lötdraht KS100 Flowtin TSC
(Contd. of page 2)
47.0.9
CAS: 7440-50-8 copper
WEL (Great Britain) Short-term value: 2** mg/m³
Long-term value: 0.2* 1** mg/m³
*fume **dusts and mists (as Cu)
·
Additional information:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
·
Respiratory protection:
Not necessary if room is well-ventilated.
Use suitable respiratory protective device in case of insufficient ventilation.
·
Protection of hands:
_S
Protective gloves
Rubber gloves
Synthetic rubber gloves
To avoid skin problems reduce the wearing of gloves to the required minimum.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the
glove material can not be calculated in advance and has therefore to be checked prior to the application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
Eye protection:
Safety glasses
SECTION 9: Physical and chemical properties
·
9.1 Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Rope
Colour:
Grey
·
Odour:
Characteristic
·
Odour threshold:
Not determined.
·
pH-value:
Not applicable.
·
Change in condition
Melting point/freezing point:
Undetermined.
Initial boiling point and boiling range:
Undetermined.
·
Flash point:
Not applicable.
·
Flammability (solid, gas):
Not determined.
·
Decomposition temperature:
Not determined.
·
Auto-ignition temperature:
Product is not selfigniting.
·
Explosive properties:
Product does not present an explosion hazard.
(Contd. on page 4)
GB