Datasheet
Page 1/6
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 02.07.2018 Revision: 02.07.2018Version number 5
47.0.9
SECTION 1: Identification of the substance/mixture and of the company/undertaking
·
1.1 Product identifier
·
Trade name: Lötdraht KS100 Flowtin TSC
·
1.2 Relevant identified uses of the substance or mixture and uses advised against
·
Technical function
soldering
·
Application of the substance / the mixture
Brazing alloy
·
1.3 Details of the supplier of the safety data sheet
·
Manufacturer/Supplier:
Stannol GmbH & Co. KG
Haberstrasse 24
D-42551 Velbert
+49 (0) 2051 3120 332
sdb@stannol.de
·
Further information obtainable from:
Product Safety Department
·
1.4 Emergency telephone number:
8:00 am - 5:00 pm (CET) +49 (0) 2051 3120 332
SECTION 2: Hazards identification
·
2.1 Classification of the substance or mixture
·
Classification according to Regulation (EC) No 1272/2008
The product is not classified, according to the CLP regulation.
·
2.2 Label elements
·
Labelling according to Regulation (EC) No 1272/2008
Does not meet labeling criteria
·
Hazard pictograms
Void
·
Signal word
Void
·
Hazard statements
Void
·
Additional information:
Safety data sheet available on request.
·
2.3 Other hazards
Solder wires / solder pastes:
Inhalation of vapors released during the soldering process should be avoided. Flux vapors irritate the nose, throat, and
respiratory tract, and can lead to allergic reactions (asthma) after prolonged or repeated contact. Therefore, an active
suction is recommended.
After working with the product and before eating, drinking or smoking, wash your hands with soap and water.
Do not heat above 500 °C.
Keep out of the reach of children.
·
Results of PBT and vPvB assessment
·
PBT:
Not applicable.
·
vPvB:
Not applicable.
SECTION 3: Composition/information on ingredients
·
3.2 Mixtures
·
Description:
Mixture of substances listed below with nonhazardous additions.
·
Dangerous components:
CAS: 7440-22-4
EINECS: 231-131-3
silver substance with a Community workplace exposure limit 2-9%
CAS: 7440-50-8
EINECS: 231-159-6
copper substance with a Community workplace exposure limit ≤1%
CAS: 7440-31-5
EINECS: 231-141-8
tin 80-100%
·
Additional information:
For the wording of the listed hazard phrases refer to section 16.
GB
(Contd. on page 2)