Data Sheet



STANNOL GmbH & Co. KG • TDB_LD_Kristall 600_EN • Stand: 22.03.19
Haberstr. 24 • 42551 Velbert • Tel: [phone] • Fax: [phone] • E-Mail: [e-mail] • www.stannol.de
2
PHYSICAL PROPERTIES AND DATA
GENERAL PROPERTIES
Kristall 600
Flux type (J-STD-004B):
REL0
Flux content (EN12224):
2.2-3.5%, depending on application
Halide content:
0.0%
Corrosion effect (J-STD-004B,
IPC-TM-650, 2.6.15):
None
Surface insulation resistance
(J-STD-004B,
IPC TM 650 2.6.3.3):
>10
8

Alloys according to
ISO 9453:2014
LEAD-FREE
FAIRTIN SN100C
Sn99.3Cu0.7NiGe (alloy 403)
Alloys according
to ISO 9453:2014
with micro-alloy additives
<0.05%
LEAD-FREE (FLOWTIN SERIES)
FAIRTIN Flowtin TC
Sn99.3Cu0.7
FAIRTIN Flowtin TSC305
Sn96.5Ag3.0Cu0.5
Available diameters:
0.3/0.5/0.7/0.8/1.0 as standard
Available reel sizes:
500 g, 1 kg
*The listed alloys, diameters and packaging units are informative. Other combinations can be made available upon request, minimum order quantities may
apply.
HEALTH & SAFETY
Prior to use, please read the safety data sheet and take all necessary safety precautions. Soldering will create always visible
fuming. In all cases, fumes from soldering operations must be removed from the breathing zone of operators.
NOTICE
The values in this document are typical values and do not constitute a specification. This data sheet has been published for information purposes only. Any
verbal or written advise given, including information as regards the potential infringement of patents held by other parties, is not binding, irrespective of
whether it was given by a member of staff of STANNOL or one of our sales representatives. It is the responsibility of the user to take all necessary precautions
in order to ensure that our product is suitable for the intended purpose and application. Should STANNOL be found liable for damage caused by its product,
compensation for damages shall be limited to that for defects in quality.