Security Datasheet

Page 1/7
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 03.02.2023 Revision: 03.02.2023Version number 2.6 (replaces version 2.5)
56.0.8
SECTION 1: Identification of the substance/mixture and of the company/undertaking
·
1.1 Product identifier
·
Trade name: Loetdraht Ecoloy TC
Loetdraht Flowtin TC
Loetdraht Flowtin TC R
Loetdraht Fair Ecoloy TC
Loetdraht Fair Flowtin TC
·
1.2 Relevant identified uses of the substance or mixture and uses advised against
·
Technical function
Alloying element
·
Application of the substance / the mixture
Brazing alloy
·
1.3 Details of the supplier of the safety data sheet
·
Manufacturer/Supplier:
Stannol GmbH & Co. KG
Haberstrasse 24
D-42551 Velbert
[phone]
[e-mail]
·
Further information obtainable from:
Product Safety Department
·
1.4 Emergency telephone number:
8:00 am - 5:00 pm (CET) [phone]
National Poisons Information Service
[phone]
Members of the public seeking specific information on poisons should contact:
In England and Wales: NHS 111 - dial 111
In Scotland: NHS 24 - dial 111
SECTION 2: Hazards identification
·
2.1 Classification of the substance or mixture
·
Classification according to Regulation (EC) No 1272/2008
The product is not classified, according to the GB CLP regulation.
·
2.2 Label elements
·
Labelling according to Regulation (EC) No 1272/2008
Does not meet labeling criteria
·
Hazard pictograms
Void
·
Signal word
Void
·
Hazard statements
Void
·
2.3 Other hazards
Solder wires / solder pastes:
Inhalation of vapors released during the soldering process should be avoided. Flux vapors irritate the nose, throat, and
respiratory tract, and can lead to allergic reactions (asthma) after prolonged or repeated contact. Therefore, an active
suction is recommended.
After working with the product and before eating, drinking or smoking, wash your hands with soap and water.
Do not heat above 500 °C.
Keep out of the reach of children.
·
Results of PBT and vPvB assessment
·
PBT:
Not applicable.
·
vPvB:
Not applicable.
GB
(Contd. on page 2)