Safety data sheet

EC Safety Data Sheet according to Directive 1907/2006
Page: 1(3)
Trade name: Contact-Soldering-Paste
Date of issue: 25.03.2003 Revised on: 26.01.2010
Date of print: 26.01.2011
1. Name of product, characterization and company name
Information on the product
Trade name:
Contact-Soldering-Paste
Usage of the product / preparation
Soldering paste
Identification of the manufacturer / supplier
Address: Stannol GmbH
Oskarstr. 3 -7
42283 Wuppertal
Phone: [phone]
Fax: [phone]
Emergency call: 0202 585 119 (only during trading hour ( 8:00 h – 17:00 h)
E-mail: [e-mail]
2. Possible hazards:
Not a composition for the purposes of the Dangerous Substances Regulations, but nevertheless observe items 4-16
3. Composition/Information on the components
Chemical characterization: Activated resin mixture with petrolatum
Composition according to EC 1907/2006:
Contents CAS No. EINECS No. Symbols R-phrases: Substance
1-2% 506-59-2 208-046-5 Xn 22 Dimethylammoniumchloride
8-12% n.b. n.b. polymerized resin
Remainder 92045-77-7 295-459-9 Petrolatum
The wording of the R-phrases stated is indicated in Section 16
4. First Aid measures
General information: If casualty is unconscious but breathing, place in the recovery position. If breathing has stopped
apply artificial resuscitation or give oxygen by mask
After inhalation: Remove patient to fresh air. If irritation resists, obtain medical attention.
After skin contact:
If any skin irritation develops seek medical attention
After eye contact: Flush immediately with plenty of water. In cases where spitting flux has entered the eye seek
medical attention.
After ingestion: Rinse mouth immediately and drink plenty of water. Seek medical advice.
Hints for doctors. Inhalation of the flux fumes given off at soldering temperatures will irritate the nose, throat and
respiratory system. Repeated or prolonged exposure to flux fumes may cause shortness of
breath and cough.
.
Physician's information
Treatment: Decontamination, treatment of symptoms.
5. Fire fighting measures
Suitable extinguishing media: Use extinguishing media appropriate to surrounding fire conditions
Special protective equipment for
fire fighting
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and
eyes.
Additional advice: Do not discharge fire extinguishing water into surface water, groundwater and the soil.
6. Accidental release measures
Personal precautions: Wear breathing apparatus if exposed to vapours/dust/aerosols (solder fume).
Environmental precautions: Do not allow to enter drains/surface water/groundwater.
Methods for cleaning up: Take up spilled product with neutralizing, liquid-binding material (universal binding agent) and
dispose.
7. Handling and storage
Fire and explosion protection: No special measures required.
Requirements for storage
rooms and containers:
Store only in original container.
Ensure adequate ventilation of the storage area.
Hints on storage assembly: Observe hints according to storage class concept VCI (class 11)
Further information on
storage conditions:
For reasons of quality store in a cool, dark place.