Use and Care Manual

4
Check what screw size will t
in your TV. (A1,A2,A3, or A4)
If your TV has a curved back
you may need to use longer
screws with spacers.
Align the rails onto the back
of the TV and install with the
hardware.
Tools Required:
Step 1: Attach Rails to TV
1 2
Caution: Hand tighten with screwdriver only,
over tightening may damage the TV!
!
Screwdriver
1
2
Caution: If you are unable to line up the hardware
with the TV, please call: 1-855-816-6868
!
Do not use a drill for this step!