Instructions / Assembly

Pre-Operating Instructions: Air Cleaner Element Check
NOTICE:
• Do NOT run engine without water inside the pump. Operation of engine without water inside the
pump will cause the pump to overheat. Prolonged operation of engine without water inside the pump
will damage the pump gasket and impeller.
• If water within the pump is not full, shut off the engine at once and fill the pump after allowing the
unit to cool.
To Check Pump Water:
1. Remove water filler cap.
2.Visuallycheckforwaterinsidepump.
3. If too low, add water through water filler hole.
4. Securely re-fasten water filler cap.
PRIME PUMP BEFORE USE!
15