Instructions / Assembly

Operation of Water Pump (continued)

Stopping the Engine: Refer to the Controls and Features section for additional

diagrams and definitions.

IN AN EMERGENCY:

1. Turn the engine switch to the “OFF” position.

NORMAL PROCEDURE:

1. Move the throttle valve lever to the “LOWER” position.

2. Turn the engine switch to the “OFF” position.

3. Turn the fuel cock to the “OFF” position.

4. Remove the water drain plug and drain the pump chamber.

5. Remove the water filler cap and flush the pump chamber with fresh,

clean water.

6. Allow water to completely drain from the pump chamber.

7. Reinstall the water drain plug.

8. Reinstall the water filler cap.

Your Semi-Trash or Trash Pump is manufactured to accept solids and debris up to ½ the size of the

inlet and outlet diameters (i.e. a 3” pump will accept up to 1.5” solids and debris to move through

the pump and grind it to exit through the outlet). Your pump has a removable front cover with

clevises or T-bolts to remove the front cover to allow you to clean the pump housing should the

debris clog your pump.

4 Clevis Front Cover Release ST3TWPLT-CA & ST4TWPLT-CA

6 T-Bolt Front Cover Release ST2TWPLT-CA Semi Trash Model