User Manual

ENGLISH (Original Instructions)
8
TECHNICAL DATA
ROTARY HAMMER SHR263
Voltage V 220-240
Frequency Hz 50/60
Power input W 800
No-load speed min 0-1150
Impact rate bpm 0-4300
Impact energy (EPTA / Max) J 2.4/3.4
Modes 3
Max drilling capacity mm
- Concrete 26
- Steel 13
- Wood 30
Weight kg 2.6
Level of sound pressure according to EN 60745:
Sound pressure (LpA) 90.7 dB(A), uncertainty (K) 3 dB(A)
Sound power (LWA) 101.7 dB(A), uncertainty (K) 3 dB(A)
Vibration emission value ah:
ah, ID = m/s
2
8.2
ah, ID = m/s
2
3.7
Uncertainty K = 1.5 m/s²
Vibration
The declared vibration emission values stated in the
technical data and the declaration of conformity have been
measured in accordance with a standard test method
provided by EN 60745 and may be used for comparing one
tool with another. The declared vibration emission value
may also be used in a preliminary assessment of exposure.
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level
may increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation of
vibration exposure should consider, the actual conditions of
use and the way the tool is used, including taking account
of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition
to the trigger time.
Service Information
STANLEY offers a full network of company-owned and/
or authorized service agents throughout your country.
All STANLEY Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
power tool service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
STANLEY location nearest to you.
EC declaration of conformity
MACHINERY DIRECTIVE
SHR263 - Rotary Hammer
STANLEY Europe declares that these products described
under “technical data” are in compliance with: 2006/42/EC,
EN 60745-1:2009 + A11:2010, EN 60745-2-1:2010,
EN 60745-2-6:2010
These products also comply with 2014/30/EU and 2011/65/EU.
For more information, please contact STANLEY Europe at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY Europe.
Ray Laverick
Engineering Manager
STANLEY Europe, Egide Walschaertsstraat 14-18,
2800 Mechelen, Belgium
08/2016
TWO YEAR WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date
of purchase, STANLEY guarantees to replace all defective
parts free of charge or – at our discretion – replace the unit
free of charge provided that:
♦ The product has not been misused and has been used
in accordance with the instruction manual;
♦ The product has been subject to fair wear and tear;
♦ Repairs have not been attempted by unauthorized
persons;
♦ Proof of purchase is produced;
♦ The STANLEY product is returned complete with all
original components;
♦ The product hasn’t been used for hire purposes.
If you wish to make a claim, contact your seller or check
the location of your nearest authorised STANLEY repair
agent in the STANLEY catalogue or contact your local
STANLEY office at the address indicated in this manual. A
list of authorised STANLEY repair agents and full details
of our after sales service is available on the internet at:
www.2helpU.com