User Manual
ENGLISH (Original instructions)
10
TECHNICAL DATA
Vibration
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured in
accordance with a standard test method provided by EN 60745
and may be used for comparing one tool with another. The
declared vibration emission value may also be used in a
preliminary assessment of exposure.
Warning! The vibration emission value during actual use of the
power tool can differ from the declared value depending on the
ways in which the tool is used. The vibration level may increase
above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time.
TWO YEAR WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date of
purchase, STANLEY guarantees to replace all defective parts
free of charge or – at our discretion – replace the unit free of
charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized
persons;
• Proof of purchase is produced.
• The STANLEY product is returned complete with all original
components
• The product hasn’t been used for hire purposes
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY office
at the address indicated in this manual. A list of authorised
STANLEY repair agents and full details of our after sales
service is available on the internet at: www.2helpU.com
Charger SC201 SC202
Input voltage V
AC
220-240 220-240
Output voltage V
DC
18 18
Current mA 1000 2000
Approx. charge time Mins 80-240 40-120
Battery SB20C SB20S SB20D SB20M
Voltage V
AC
18 18 18 18
Capacity Ah 1.3 1.5 2.0 4.0
Type Li-Ion Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 93.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 104.5 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a
h, D
) 1.4 m/s
2
, uncertainty (K) 1.5 m/s
2
Screwdriving without impact (a
h
) 0.8 m/s
2
, uncertainty (K) 1.5 m/s
2
Impact drilling into concrete (a
h.ID
) 11.3 m/s
2
, uncertainty (K) 1.5m/s
2
SBH20
Voltage V
DC
18V
No-load speed Min
-1
0-430/0-1700
Max. torque Nm 55
Chuck capacity mm 13
Max Drilling capacity
Steel/wood/Masonary mm 13/35/13
Weight kg 1.5
EC declaration of conformity
MACHINERY DIRECTIVE
SBH20 Hammer drill
STANLEY declares that these products described under
"technical data" are in compliance with: 2006/42/EC, EN
60745-1:2009 + A11:2010, EN 60745-2-1:2010
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of STANLEY.
R.Laverick
Engineering Manager
STANLEY Europe, Egide Walschaertsstraat 14-18,
2800 Mechelen, Belgium
01.2017