Assembly Instruction

SCREWDRIVER
SHELF SUPPORT
SCREW
NOTE: Your furniture may have different design features than those shown in the drawing.
95518-45 Tall Hutch
A-1251
1. LIFT HUTCH ONTO BASE:
Carefully lift the HUTCH onto the BASE
and align it.
2. ATTACH HUTCH TO BASE:
Align Back of the HUTCH with Back of the
BASE, center and secure with MENDING
PLATES and SCREWS, as shown.
NOTE: If a Power Screwdriver is used,
use a "low torque" setting.
LEVEL
the BASE according to
the Instructions provided.
LEVELING:
BACK SIDE
HUTCH
BACK SIDE
BASE
CAREFULLY READ AND
UNDERSTAND ALL
INSTRUCTIONS BEFORE
PROCEEDING!
CAUTION:
(2) OR MORE PERSONS
RECOMMENDED FOR
ASSEMBLY!
MENDING
PLATES
REMOVABLE PARTITIONS
To install REMOVABLE PARTITIONS,
locate WIRE SUPPORTS in the Upper and
Lower Shelves. Align Grooves in the Top
and Bottom Edges of the PARTITIONS
with the WIRE SUPPORTS, and carefully
slide the PARTITIONS between the Upper
and Lower WIRE SUPPORTS (as shown
below).
SHELF
LOWER
SUPPORTS
WIRE
SHELF
UPPER
GROOVE
REMOVABLE
PARTITION
ADJUSTABLE SHELVES
To remove ADJUSTABLE SHELVES,
remove SCREWS from SHELF
SUPPORTS, then carefully lift
Shelves up and out of the Armoire.
To reposition ADJUSTABLE
SHELVES, insert Stem of SHELF
SUPPORTS into Holes as shown.
Rest the SHELF on the SHELF
SUPPORTS, and reinstall SCREWS.

Summary of content (1 pages)