Operation Manual

10
ENGLISH
(Original instructions)
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe ofce at
the address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Stanley Fat Max batteries can be recharged many
times. At the end of their useful life, discard batter-
ies with due care for our environment:
u Run the battery down completely, then remove it from the
tool.
u NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
Technical data
FMC710 (Type 1)
Voltage V
DC
18
No-load speed min
-1
8000 - 18000
Oscillating angle Degrees
1.4 or 2.8
Weight
kg 1.4
Charger
905765**
typ. 1
906086**
typ. 1
Input Voltage
V
AC
230 230
Output Voltage V
DC
20 18
Current A 2 2
Approx. charge time min
45 - 120 45 - 120
Battery
FMC685L FMC687L FMC688L
Voltage
V
DC
18 18 18
Capacity Ah 1.5 2.0 4.0
Type Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 94.2 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 105.2 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Cutting wood (a
h, CW
) 7.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Cutting metal (a
h, CM
) 7.9 m/s
2
, uncertainty (K) 1.5 m/s
2
Sanding (a
h
) 8.2 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
Cordless Oscillating Tool - FMC710
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-4
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more information, please
contact Stanley Europe at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical
le and makes this declaration on behalf of Stanley Europe.
_
Kevin Hewitt
Vice-President Global Engineering
Stanley Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
13/03/2014