SDS

LG CHEM SAFETY DATA SHEET Rev. 1.0 2017-01-05
Safety Data Sheet Page 4 of 10 Printed 17-1-11
(2) Methods and Materials for Containment and Cleaning Up
Evacuate spill area immediately and remove sources of ignition. Do NOT touch
spilled material. Cleanup personnel must be trained in the safe handling of this
product. Spills may be absorbed on non-reactive absorbents such as vermiculite.
Place batteries into individual plastic bags and then place into appropriate
containers and close tightly for disposal. Ensure that cleanup procedures do not
expose spilled material to any moisture. Immediately transport closed containers
outside. Lined steel drums are suitable for storage of damaged cells or batteries
until proper disposal can be arranged.
7. Handling and Storage
(1) Precautions for Safe Handling
Avoid short circuiting the battery. Avoid mechanical damage of the battery.
Do not open or disassemble. Advice on protection against fire and explosion
Keep away from open flames, hot surfaces and sources of ignition.
(2) Cautions for Safe Storage, Including Any Incompatibilities
Store in a dry and cool (eg. room temperature (approx. 20°C)) place at approx.
20~60% of the nominal capacity. (OCV approx. 3.6 - 3.9 V/cell). Keep in
closed original container.
8. Exposure Controls / Personal Protection
(1) Exposure Limit Value
Airborne exposures to hazardous substances are not expected when the
batteries are used for their intended purposes. Exposure standards are not
applicable to the sealed articles.
(2) Engineering Controls
Special ventilation is not required when using these products in normal use
scenarios. Ventilation is required if there is leakage from the battery.